2.0.1测试版的/dev/input里有键盘设备了么?
我现在不知道是否是因为 2.0F 里没有设备的原因还是别的。gensplash 不能按 F2 切换界面……………………
gentoo 的设置里似乎也没找到相关的 splash 控制命令………………
:( 2.01我昨天刚测试。启动时按f2可以切换界面 2.0f也可以的,如果不行,应该是其它原因。 ML 用的是 bootsplash ,不是我要用的 gensplash ,他用的不是 EVDEV 。
gensplash 的功能要比 bootsplash 多,但需要 EVDEV 的支持。
现在我这里可以显示 gensplash 画面、进度条。但就是不能按 F2 切换。
翻了 Gentoo 的各种配置,也没见到什么有用的东西……………………
唯一的目标就是 /dev/input 里的问题了………………
内核的配置应该没问题的,我现在 Gentoo 用的就是我测试 ML 时内核的 .config 。
郁闷啊…………………… 只知道那个文件夹下面有鼠标设备,没见过键盘设备。 :-(
Gentoo 的那里面还有键盘的。
localhost ~ # ls /dev/input/ -l
总计 0
crw------- 1 root root 13,64 2006-05-27 event0
crw------- 1 root root 13,65 2006-05-27 event1
crw-r--r-- 1 root root 13,63 2006-05-27 mice
crw-r--r-- 1 root root 13,32 2006-05-27 mouse0
crw------- 1 root root 13, 128 2006-05-27 ts0
localhost ~ # cat /proc/bus/
input/ pci/ usb/
localhost ~ # cat /proc/bus/input/devices
I: Bus=0011 Vendor=0001 Product=0001 Version=ab41
N: Name="AT Translated Set 2 keyboard"
P: Phys=isa0060/serio0/input0
S: Sysfs=/class/input/input0
H: Handlers=kbd event0
B: EV=120013
B: KEY=4 2000000 3802078 f840d001 f2ffffdf ffefffff ffffffff fffffffe
B: MSC=10
B: LED=7
I: Bus=0003 Vendor=046d Product=c025 Version=9802
N: Name="B16_b_02 USB-PS/2 Optical Mouse"
P: Phys=usb-0000:00:10.0-1/input0
S: Sysfs=/class/input/input1
H: Handlers=mouse0 event1 ts0
B: EV=7
B: KEY=ff0000 0 0 0 0 0 0 0 0
B: REL=103
localhost ~ #
页:
[1]