wjchen 发表于 2006-7-7 16:53:53

起动uclinux出现问题,是不是网卡驱动的问题,请指教啊?

起动信息如下:
Linux version 2

Starting kernel ...host.localdomain) (

Linux version 2.4.20-uc0 ([email protected]) (gcc version 2.95.3 200103                     
15 (release)(ColdFire patches - 20010318 from http://fid
15 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClin                     
ux XIP and shared lib patches from http://www.snapgear.c
ux XIP and shared lib patches from http://www.snapgear.com/)) #58 鏃?6鏈?25 23                     
:55:04 CST 2006               
Processor: Samsung S3C451
:55:04 CST 2006               
Processor: Samsung S3C4510B revision 6100                     
On node 0 tot
Architecture: SNDS100               
zon
On node 0 totalpages: 2048   
zone(1): 2048 pages.
zone(0): 0 pages.
zone(2): 0 page
zone(1): 2048 pages.ernel command line:
zone(2): 0 pages.               
Kernel command line: root=/dlay loo                  
POSIX conformance testing by UNIFIX      
Based upon Swansea Universi
Linux NET4.0 for Linux 2.49                        
Based upon Swansea University Cnitializing RT               
ttyS0 at I/O 0x1d00000 (irq = 3) is a S3C44B01d04000 (irq = 2) is a S3C44B0               
ttyS1 at I/O 0x1d04000 (irq = 2) is a S3C44B0t 1998,1999 D. Jeff Dionne                  
Blkmem copyright 1998,1999 D. Jeff Dionne98 Kenneth Albanowski                  
Blkmem copyright 1998 Kenneth Albanowski:                     
0: C0E0870-C1A946
Blkmem 1 disk images:946F] (RO)         
0: C0E0870-C1A946F (RO)ver initialized: 16 RAM disks o
eth0: 00:80:48:12:34:56
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
VFS: Mounted root (romfs filesystem) readonly.
Freeing init memory: 40K
Shell invoked to run file: /etc/rc
Command: hostname Samsung
Command: /bin/expand /etc/ramfs.img /dev/ram0
Command: /bin/expand /etc/ramfs2048.img /dev/ram1
Command: mount -t proc proc /proc
Command: mount -t ext2 /dev/ram0 /var
Command: mount -t ext2 /dev/ram1 /ramdisk
Command: chmod 777 /ramdisk
Command: mkdir /var/config
Command: mkdir /var/tmp
Command: mkdir /var/log
Command: mkdir /var/run
Command: mkdir /var/lock
Command: ifconfig lo 127.0.0.1
Command: route add -net 127.0.0.0 netmask 255.255.255.0 lo
Command: ifconfig eth0 192.168.168.101 netmask 255.255.255.0 up
起动到这就停止了,不知什么原因?谢谢!

lumit-support-1 发表于 2006-7-7 20:55:30

你把ifconfig eth0 192.168.168.101 netmask 255.255.255.0 up 注释掉再试试看
就算网卡没起来也不应该死掉啊
页: [1]
查看完整版本: 起动uclinux出现问题,是不是网卡驱动的问题,请指教啊?