slax 服务器版本 mysql 端口问题 那个老大帮我解决一下 谢谢
我下了个slax 服务器版本的 里面集成了php.mysql等那个老大用过指点一下
mysql 没有端口（3306）
mysql服务已经启动.用mysql 等命令都能用
进程也有
Warning: bad ps syntax, perhaps a bogus '-'? See http://procps.sf.net/faq.html
root 46360.00.1 24121244 ? S 12:59 0:00 /bin/sh /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid --skip-networking
mysql 46690.01.9 101436 14432 ? Sl 12:59 0:00 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysql/mysql.pid --skip-locking --skip-networking
root 67340.00.0 1640 520 pts/0 S+ 13:12 0:00 grep mysql
在etc 下有4个 *.cnf
my-huge.cnf my-large.cnf my-medium.cnfmy-small.cnf
不知道那个是mysql 的cnf
安装完成后就是没有端口
小弟吧 *.cnf 中的skip-networking前面的#也去掉了
有建立一个my.cnf文件 还是不行 就是没端口
不知道slax 的mysql读取的是那个*.cnf
那个老大用过slax 服务器版本帮我看一下谢谢了
下面是my.cnf内容
# Example MySQL config file for medium systems.
#
# This is for a system with little memory (32M - 64M) where MySQL plays
# an important part, or systems up to 128M where MySQL is used together with
# other programs (such as a web server)
#
# You can copy this file to
# /etc/my.cnf to set global options,
# mysql-data-dir/my.cnf to set server-specific options (in this
# installation this directory is /var/lib/mysql) or
# ~/.my.cnf to set user-specific options.
#
# In this file, you can use all long options that a program supports.
# If you want to know which options a program supports, run the program
# with the "--help" option.
# The following options will be passed to all MySQL clients
#password = your_password
port = 3306
socket = /var/run/mysql/mysql.sock
# Here follows entries for some specific programs
# The MySQL server
port = 3306
socket = /var/run/mysql/mysql.sock
skip-locking
key_buffer = 16M
max_allowed_packet = 1M
table_cache = 64
sort_buffer_size = 512K
net_buffer_length = 8K
read_buffer_size = 256K
read_rnd_buffer_size = 512K
myisam_sort_buffer_size = 8M
# Don't listen on a TCP/IP port at all. This can be a security enhancement,
# if all processes that need to connect to mysqld run on the same host.
# All interaction with mysqld must be made via Unix sockets or named pipes.
# Note that using this option without enabling named pipes on Windows
# (via the "enable-named-pipe" option) will render mysqld useless!
#
skip-networking
# Replication Master Server (default)
# binary logging is required for replication
log-bin=mysql-bin
# required unique id between 1 and 2^32 - 1
# defaults to 1 if master-host is not set
# but will not function as a master if omitted
server-id = 1
# Replication Slave (comment out master section to use this)
#
# To configure this host as a replication slave, you can choose between
# two methods :
#
# 1) Use the CHANGE MASTER TO command (fully described in our manual) -
# the syntax is:
#
# CHANGE MASTER TO MASTER_HOST=<host>, MASTER_PORT=<port>,
# MASTER_USER=<user>, MASTER_PASSWORD=<password> ;
#
# where you replace <host>, <user>, <password> by quoted strings and
# <port> by the master's port number (3306 by default).
#
# Example:
#
# CHANGE MASTER TO MASTER_HOST='125.564.12.1', MASTER_PORT=3306,
# MASTER_USER='joe', MASTER_PASSWORD='secret';
#
# OR
#
# 2) Set the variables below. However, in case you choose this method, then
# start replication for the first time (even unsuccessfully, for example
# if you mistyped the password in master-password and the slave fails to
# connect), the slave will create a master.info file, and any later
# change in this file to the variables' values below will be ignored and
# overridden by the content of the master.info file, unless you shutdown
# the slave server, delete master.info and restart the slaver server.
# For that reason, you may want to leave the lines below untouched
# (commented) and instead use CHANGE MASTER TO (see above)
#
# required unique id between 2 and 2^32 - 1
# (and different from the master)
# defaults to 2 if master-host is set
# but will not function as a slave if omitted
#server-id = 2
#
# The replication master for this slave - required
#master-host = <hostname>
#
# The username the slave will use for authentication when connecting
# to the master - required
#master-user = <username>
#
# The password the slave will authenticate with when connecting to
# the master - required
#master-password = <password>
#
# The port the master is listening on.
# optional - defaults to 3306
#master-port =<port>
#
# binary logging - not required for slaves, but recommended
#log-bin=mysql-bin
# Point the following paths to different dedicated disks
#tmpdir = /tmp/
#log-update = /path-to-dedicated-directory/hostname
# Uncomment the following if you are using BDB tables
#bdb_cache_size = 4M
#bdb_max_lock = 10000
# Uncomment the following if you are using InnoDB tables
#innodb_data_home_dir = /var/lib/mysql/
#innodb_data_file_path = ibdata1:10M:autoextend
#innodb_log_group_home_dir = /var/lib/mysql/
#innodb_log_arch_dir = /var/lib/mysql/
# You can set .._buffer_pool_size up to 50 - 80 %
# of RAM but beware of setting memory usage too high
#innodb_buffer_pool_size = 16M
#innodb_additional_mem_pool_size = 2M
# Set .._log_file_size to 25 % of buffer pool size
#innodb_log_file_size = 5M
#innodb_log_buffer_size = 8M
#innodb_flush_log_at_trx_commit = 1
#innodb_lock_wait_timeout = 50
quick
max_allowed_packet = 16M
no-auto-rehash
# Remove the next comment character if you are not familiar with SQL
#safe-updates
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
key_buffer = 20M
sort_buffer_size = 20M
read_buffer = 2M
write_buffer = 2M
interactive-timeout
[ 本帖最后由 x7780 于 2010-4-11 13:24 编辑 ] 实在没明白你说的是啥，服务器应用包我做过，很成功，不会遇到没端口的问题。
怎么样叫没端口，你的意思是指被防火墙阻挡了？！
netstat -a | grep '3306' 试试（可能是nbtstat 有日子没用了，试下TAB吧）
如果能看到就正常啊，或者试一下
mysqld -u root -p
看看能不能登陆进数据库，如果能，就是正常了，如果不能，那说明你数据库配置有问题，不要发这么一大堆配置文件上来嘛，你先把配置换回官方默认的，然后进行修改，你只需说明你改了哪些就OK，不然这配置文件看着头大啊。
实在不行，你下个标准版的SLAX，然后试试我上传到官网的MYSQL包吧。
Apache-2.2.13+php-5.2.10+Zend-3.3.9
http://www.slax.org/modules.php?action=detail&id=2685
MySQL 5.0.67 i486
http://www.slax.org/modules.php?action=detail&id=2686
另外说明一下，官方没有服务器版的，我个人的看法是，最好你自己安装配置一个服务器平台出来，那样放心点。
[ 本帖最后由 applewolf 于 2010-4-30 23:21 编辑 ]
页:
[1]