nobbs 发表于 2011-4-11 09:34:43

求助：装好magiclinux后，进入的是终端不是桌面！

我安装的是Magic Linux 2.6.1 x86_64CPU： amd x2 245显卡：ati hd 4200

总提示：INIT:Id"x" respawning too fast: disabled for 5 minutes

:shock:

怎么解决？

nobbs 发表于 2011-4-25 20:10:26

我就想知道这个问题到底咋解决，我都装了5次了，每次都这提示，无论是本机还是虚拟机，真郁闷呢。

:? 我的pci列表


00:00.0 Host bridge: Advanced Micro Devices RS880 Host Bridge
00:01.0 PCI bridge: Advanced Micro Devices RS780/RS880 PCI to PCI bridge (int gfx)
00:04.0 PCI bridge: Advanced Micro Devices RS780 PCI to PCI bridge (PCIE port 0)
00:11.0 SATA controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 SATA Controller
00:12.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:12.1 USB Controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:12.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:13.0 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
00:13.1 USB Controller: ATI Technologies Inc SB7x0 USB OHCI1 Controller
00:13.2 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB EHCI Controller
00:14.0 SMBus: ATI Technologies Inc SBx00 SMBus Controller (rev 3c)
00:14.1 IDE interface: ATI Technologies Inc SB7x0/SB8x0/SB9x0 IDE Controller
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
00:14.3 ISA bridge: ATI Technologies Inc SB7x0/SB8x0/SB9x0 LPC host controller
00:14.4 PCI bridge: ATI Technologies Inc SBx00 PCI to PCI Bridge
00:14.5 USB Controller: ATI Technologies Inc SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
00:18.0 Host bridge: Advanced Micro Devices Family 10h Processor HyperTransport Configuration
00:18.1 Host bridge: Advanced Micro Devices Family 10h Processor Address Map
00:18.2 Host bridge: Advanced Micro Devices Family 10h Processor DRAM Controller
00:18.3 Host bridge: Advanced Micro Devices Family 10h Processor Miscellaneous Control
00:18.4 Host bridge: Advanced Micro Devices Family 10h Processor Link Control
01:05.0 VGA compatible controller: ATI Technologies Inc RS880
02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)

[ 本帖最后由 nobbs 于 2011-4-25 20:11 编辑 ]

haulm 发表于 2011-4-26 00:06:21

2.6 是 64 位开发版，应该还只能用于测试。

sejishikong 发表于 2011-4-28 09:31:28

那个2.6是开发版本的第一个快照版，离能用还长着呢。不过如果配置好了，X是可以进的。

nobbs 发表于 2011-4-28 12:36:16

回复 4# sejishikong 的帖子

我想应该是安装过程中没有自己去配置X参数，而是选择了那个自动配置，倒霉在我是A卡，不是N卡。

fox_eagle2003 发表于 2011-4-28 16:27:59

不是A卡的错
页: [1]
查看完整版本: 求助：装好magiclinux后，进入的是终端不是桌面！