Brosero 问题
如图所示,图已上传至http://imagebin.org/156676用sudo也没用。。。
确定dvd rw and 盘是没问题的。就算有问题也不应该是灰色 你放的CD-R进去还是DVD-R进去? cd-r
我想说的是,不管我放的是什么,哪怕我没有放,下面的选择颜色不应该是灰色,不光光是这个问题,刻audio and data也是这样,没得选择,刻别的,东西,只有一个刻录成镜像的选择,我在想为什么 brasero认不到我的rw?
甚至可以这么说,我disk copy的时候,都认不到我的光驱。退一万步讲就算我的是cd-rom的,它居然都认不到。
[ 本帖最后由 lansek 于 2011-6-4 14:47 编辑 ] 系统版本?主板型号?光驱接口?光驱型号? blue@blue-laptop:~$ cdrecord -scanbus
scsibus1:
1,0,0 100) 'TSSTcorp' 'CDDVDW TS-L633C ' 'SN01' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
blue@blue-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 02)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 02)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 05)
00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 05)
00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 05)
00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 05)
00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a5)
00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 05)
00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 4 port SATA AHCI Controller (rev 05)
00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 05)
00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 05)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood
01:00.1 Audio device: ATI Technologies Inc Redwood HDMI Audio
02:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
03:00.0 SD Host controller: Ricoh Co Ltd Device e822
03:00.1 System peripheral: Ricoh Co Ltd Device e230
03:00.4 SD Host controller: Ricoh Co Ltd Device e822
04:00.0 Ethernet controller: Marvell Technology Group Ltd. Device 4381 (rev 11)
3f:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-core Registers (rev 02)
3f:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 02)
3f:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 02)
3f:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 02)
3f:02.2 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
3f:02.3 Host bridge: Intel Corporation Core Processor Reserved (rev 02)
sony vpcea48ec
scsi接口(貌似)
ubuntu 10.04,kernel is 2.6.32.31 日韩系请自觉只用机器自带系统。
你这机器根本就不是 SCSI 的,一个笔记本上 SCSI 设备貌似只有 20 寸以上的水泥预制板才会用。不然就是服务器或者高端工作站机器。
你这个应该是 SATA 的光驱,Intel 的芯片组好像从 3x 开始就不再提供 IDE 接口。
你的 Linux 是 10 年 4 月发布的,但你的机器是 10 年下半年发布的,硬件新于系统发布时间。这样很容易出现兼容问题,尤其是日韩系根本不考虑硬件兼容问题的特色。
升级系统吧。 从输出信息来看,应该是已经识别出光驱了才对。 版主的推理有道理,但是我真的不想升级,呵呵,有时间我升级一下kernel试一下,不过升级了kernel,显卡又要折腾,然后还有一个就是2.6.39貌似不支持2d,3d ati。
再说吧,下次我试试。。。如果升级了系统还不行再来请教。 ubuntu 自己的升级功能升级后也不支持么?11.04 已经发布很久了吧……
如果还不行就上 11.10 的测试版吧
页:
[1]