error 2 reading header
running install...running /sbin/loader
error 2 reading header: cpio:Bad magic
error 2 reading header: cpio:Bad magic
Running anaconda, the Red Hat linux system installer-please wait...
install exited abnormally
sending termination signals...done
sending kill signals... done
disableing swap...
unmount file systems...
/mnt/runtime done
disableing /dev/loop 0
/proc/bus/usb done
/proc done
/dev/pts done
/tmp/ramfs done
/mnt/source done
you may safely reboot your system...
用光盘安装 redhat 9 的时候出现上面的两行提示
然后就是让我安全的重新启动计算机。
错误出现在 boot: 确认后
没有进入图形安装模式的画面。
我以前安装过，系统坏了。 我把整个盘在DOS里格式化了一次 再安装就出现上面的错误。 硬盘在DOS下面是好的。
听说要关闭APM的电源选项和硬盘的UDMA模式：
但是BIOS里面没有电源的APM选项。
我关闭了BIOS里面硬盘的 UDMA 模式 都换成了PIO模式。还是一样。
我用boot:linuxtext模式安装也是一样
还尝试了从网上下载ISO从硬盘安装 还是一样 找到一个和我问题一样的文章 全部是英文看不明白 大家帮忙看看
http://www.redhat.com/archives/fedora-list/2003-November/msg05430.html
On 2003.11.21 09:29 Johan Dahl wrote:
Hi
I'm trying to install Fedora Core 1 on a Dell GX150 desktop computer. But then Anaconda tries to start I get the following error:
error 2 reading header: cpio: Bad magic
error 2 reading header: cpio: Bad magic
error 2 reading header: cpio: Bad magic
Lower on the screen I get the following
Running anaconda, the Fedora Core system installer - please wait...
exec of anaconda failed: Bad adressinstall exited abnormally
sending termination signals...done
sending kill signals...done
some more text about shutting down and then finally
you may safely reboot your system...
AND yes I have tested the media and I have used it to install on another computer.
Anyone else having these problems????
Johan Dahl
--
Hi Johan,
I got exactly the same anaconda error when I tried to install on a Dell OptiFlex GX260 but I didn't get the cpio error.
I had checked the MD5sum of the iso images and done a media check.
Now for the "solution". I had been busy at work, so after the install failed, I didn't do anything for about 2 days. I was going to try the CDs that I had made on a different computer but then decided to give it one one atttempt on the Dell. It worked.
Nothing had changed. I didn't even take the CD out of the drive. I guess these Dell computers need a little time to get used to running a new OS Steve Blackwell.
Johan Dahl, Research Engineer
Department of Linguistics and Phonetics, Lund University
Address: Helgonabacken 12, 223 62 Lund, SWEDEN
Tel: +46-(0)46-2228443 Fax: +46-(0)46-2224210
mailto:Johan Dahl ling lu se
http://www.ling.lu.se/persons/JohanDahl.html
"All science is either physics or stamp collecting." - Ernest Rutherford
--
fedora-list mailing list
fedora-list redhat com
To unsubscribe: http://www.redhat.com/mailman/listinfo/fedora-list 网上找到的 ：
Thanks Chuck,this info has come in very handy.I can almost get this
done.I still have one error when I do this.When I do the find
2.2.16-22BOOT -print -depth | cpio -ovF modulesnew.cpio. It complains about
truncating inode number.And when I go to use the new disk it get the
"Error 2 reading header cpio: Bad Magic" in the Alt F3 screen, and of cource
I get Failed to insert dmfe module in Alt F1.I did not remove any drivers
from the disk, just added the .o file to the 2.2.16-22BOOT directory and
archived & recompressed it and modified module-info file and then created
the initrd.img file. Any ideas greatly appreciated.
Wayne http://www.linuxfans.org/nuke/modules.php?name=Forums&file=viewtopic&t=31387&highlight=error+2+reading+header
这个朋友和我的问题是一样的 也没有解决哦
肯定不是光盘的问题
我特别从网上下载了个ISO来做硬盘安装也是不能安装 硬盘安装也是同样的错误吗？ 换内存看看,我也遇到这样的问题.换了内存就没有事了 且建议把光驱与硬盘用同一条线,也有一种可能是因为主板IDE插槽有问题 BS 考古的。
页:
[1]