求助,qsampler安装后不能运行!

witman

http://qsampler.sourceforge.net/qsampler-index.html
上的qsampler安装后不能运行.我是照它的installation提示来的:
-------------------------------------------------------------------------------------
Installation
You'll need to install the liblscp package before you can play with qsampler. This is for LinuxSampler Control Protocol support library, which qsampler is based.

Grab the source from here: liblscp-0.3.3.tar.gz

The installation procedure is similar for both packages, liblscp and qsampler, and follows the standard for source distributions. For each one, in the extracted source directories, just do:

./configure [--prefix=prefix]
make

and optionally as root:

make install

Note that liblscp is a shared library, so be sure to have it registered on your shared library path (either on LD_LIBRARY_PATH environment variable or on /etc/ld.so.conf). Maybe it's already up there.

The procedure for qsampler will install the following couple of files:

prefix/bin/qsampler
prefix/share/icons/qsampler.png
Just launch prefix/bin/qsampler and you're off (hopefully). Note that the default installation path prefix is /usr/local .
-------------------------------------------------------------------------------------
运行时提示找不到共享库liblscp,我查了,liblscp库在/usr/local/lib目录,而且在/etc/ld.so.conf文件中已有路经/usr/local/lib,但还是找不到!后来我用它的
rpm文件装,运行时虽出现了界面(不完整)但仍然中止运行.哪位高手能帮我解决这个问题吗?在这里先谢谢了!有关qsampler可登录www.linuxsampler.org.

jiangtao9999

估计是因为没有正确获取 liblscp 的路径，导致失败的。
你看看 ./configure --help 的输出，看看有没有设置 liblscp 路径的参数，如果有就 =/usr/local
肯定是你装的时候没有设置 liblscp 的 --prefix ，大家一般都是放在 /usr 里，但很多程序默认是 /usr/local ，而且没有有效的获取正确安装路径的方式，经常导致找不到。

witman

成了!!!谢谢jiangtao9999指点,linux系统用过几个,纯粹是用,没什么研究,用惯了windows,用起linux是一头雾水,特别是装应用程序,它的依赖关系往往会使你放弃,free软件五花八门倒是很多,用起来并不free.听说gentoo这方面问题少些,但又说那是高手玩的而望而生畏.magiclinux我感觉是比较好的linux系统,比RF,RH,FC,MD,SUSE好用(没有贬低之意,主要是我不大会使用),支持magiclinux.另外问一句,magiclinux安装时能否选择性地安装仅仅自己需要的模块,就象FreeBSD那样?

jiangtao9999

ML 目前只有完全安装………………