QQ登录

只需一步,快速开始

 找回密码
 注册

QQ登录

只需一步,快速开始

查看: 2288|回复: 1

求助:我的fedora10经常死机是怎么回事?

[复制链接]
发表于 2009-1-14 13:27:08 | 显示全部楼层 |阅读模式
我用的是lenovo3000系列笔记本。

系统信息:
fedora
版本10
内核linux2.627.5117.fc10.i686
gnome2.24.1

[xuhong@SMYY~]$ lspci
00:00.0 Host bridge: Intel Corporation Cantiga MemoryController Hub (rev 07)
00:02.0 VGA compatible controller: IntelCorporation Cantiga Integrated Graphics Controller (rev 07)
00:02.1Display controller: Intel Corporation Cantiga Integrated GraphicsController (rev 07)
00:1a.0 USB Controller: Intel Corporation82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1b.0 Audiodevice: Intel Corporation 82801I (ICH9 Family) HD Audio Controller(rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9Family) PCI Express Port 1 (rev 03)
00:1d.0 USB Controller: IntelCorporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge(rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M LPC InterfaceController (rev 03)
00:1f.2 IDE interface: Intel CorporationICH9M/M-E 2 port SATA IDE Controller (rev 03)
00:1f.3 SMBus: IntelCorporation 82801I (ICH9 Family) SMBus Controller (rev 03)
00:1f.5IDE interface: Intel Corporation ICH9M/M-E 2 port SATA IDE Controller(rev 03)
07:00.0 Ethernet controller: Broadcom Corporation NetLinkBCM5906M Fast Ethernet PCI Express (rev 02)



[root@SMYY X11]# glxinfo|grep rendering
direct rendering: Yes

[root@SMYY X11]# glxgears
4535 frames in 5.0 seconds =906.839 FPS
4709 frames in 5.0 seconds =941.603 FPS
4709 frames in 5.0 seconds =941.639 FPS
4707 frames in 5.0 seconds =941.321 FPS
4708 frames in 5.0 seconds =941.464 FPS

另外,在/etc/X11下没有找到xorg.conf文件,在/root下有个xorg.conf.new文件,内容为:
Section "ServerLayout"
    Identifier     "X.org Configured"
    Screen      0  "Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
    ModulePath   "/usr/lib/xorg/modules"
    FontPath     "catalogue:/etc/X11/fontpath.d"
    FontPath     "built-ins"
EndSection

Section "Module"
    Load  "dri"
    Load  "extmod"
    Load  "glx"
    Load  "dbe"
EndSection

Section "InputDevice"
    Identifier  "Keyboard0"
    Driver      "kbd"
EndSection

Section "InputDevice"
    Identifier  "Mouse0"
    Driver      "mouse"
    Option        "Protocol" "auto"
    Option        "Device" "/dev/input/mice"
    Option        "ZAxisMapping" "4 5 6 7"
EndSection

Section "Monitor"
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "Monitor Model"
EndSection

Section "Device"
        ### Available Driver options are:-
        ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
        ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
        ### [arg]: arg optional
        #Option     "NoAccel"                # [<bool>]
        #Option     "SWcursor"               # [<bool>]
        #Option     "ColorKey"               # <i>
        #Option     "CacheLines"             # <i>
        #Option     "Dac6Bit"                # [<bool>]
        #Option     "DRI"                    # [<bool>]
        #Option     "NoDDC"                  # [<bool>]
        #Option     "ShowCache"              # [<bool>]
        #Option     "XvMCSurfaces"           # <i>
        #Option     "PageFlip"               # [<bool>]
    Identifier  "Card0"
    Driver      "intel"
    VendorName  "Intel Corporation"
    BoardName   "Cantiga Integrated Graphics Controller"
    BusID       "PCI:0:2:0"
EndSection

Section "Screen"
    Identifier "Screen0"
    Device     "Card0"
    Monitor    "Monitor0"
    SubSection "Display"
        Viewport   0 0
        Depth     1
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     4
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     8
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     15
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     16
    EndSubSection
    SubSection "Display"
        Viewport   0 0
        Depth     24
    EndSubSection
EndSection


所遇问题:
1、我的显卡是否已经正常驱动?
2
、开启桌面3D特效时计算机经常停止响应,无法进行任何操作,只能关闭电源重新启动;
3
、系统长时间不操作,自动关闭监视器后,无法唤醒,也无法进行任何操作;
4
altctrlf2切换到终端下,再切换回图形界面就黑屏,无法进行任何操作。

请问各位高手多多指教,到底是硬件还是软件的问题?多谢!
发表于 2009-5-4 13:36:11 | 显示全部楼层
可以肯定,你的显卡驱动有问题。你的显卡是什么,linux对Intel 的显卡一般支持很好啊。不过从上面你的情况一定是显卡驱动的问题。试着到官方网站上去找找最新驱动更新看!
回复

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

GMT+8, 2024-3-29 04:24 , Processed in 0.057756 second(s), 15 queries .

© 2021 Powered by Discuz! X3.5.

快速回复 返回顶部 返回列表