中国Linux公社论坛's Archiver

jallin 发表于 2007-3-9 23:22

新手求助,EVAQQ的安装问题

本人刚下载了EVAQQ,配置和解压都完成了,显示Good - your configure finished. Start make now,然后我就编译软件,用MAKE命令,居然出现qq_crypt.c:236: error: static declaration of 'decrypt_every_8_byte' follows non-static declaration
qq_crypt.c:235: error: previous declaration of 'decrypt_every_8_byte' was here
make[2]: *** [qq_crypt.lo] 错误 1
make[2]: Leaving directory `/home/jallin/Desktop/eva-0.2.0/src/libeva'
make[1]: *** [install-recursive] 错误 1
make[1]: Leaving directory `/home/jallin/Desktop/eva-0.2.0/src'
make: *** [install-recursive] 错误 1,这是怎么回事阿 ,刚用LINUX不久,用的 红帽FC5,怎么可以 解决这个问题亚,谢谢各位大虾,

三翻领 发表于 2007-3-9 23:55

eva-0.2.0.................
太老了吧

jallin 发表于 2007-3-11 08:58

刚接触LINUX,不是很懂,现在已经安装成功了,可以用了,是解压的时候用错了命令,该JXVF,我用错了,用成ZXVF了。

jallin 发表于 2007-3-11 08:58

刚接触LINUX,不是很懂,现在已经安装成功了,可以用了,是解压的时候用错了命令,该JXVF,我用错了,用成ZXVF了。

自由狼-台风 发表于 2007-6-30 21:21

MagicLinux-2.0-Final
eva-20070623
配置、编译、安装通过,运行崩溃。
cd SOURCE
configure --prefix=/opt/prog/c/EVA
make
make install

回溯信息:
[code](no debugging symbols found)
Using host libthread_db library "/lib/tls/libthread_db.so.1".
(no debugging symbols found)
`shared object read from target memory' has disappeared; keeping its symbols.
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread -1236731680 (LWP 20025)]
[KCrash handler]
#4  0xb6bfe012 in QIconSet::reset () from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#5  0xb6bfe1fd in QIconSet::QIconSet () from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#6  0x08077d35 in EvaMain::initMenus ()
#7  0x0807827f in EvaMain::doInitUI ()
#8  0x08080c74 in EvaMain::EvaMain ()
#9  0x0807304a in main ()[/code]

yunfan 发表于 2007-7-4 15:18

楼上,/opt/prog/c/EVA 这个做 prefix 可能会出问题。
prefix 用`kde-config --prefix` 试试看

页: [1]

Powered by Discuz! Archiver 6.1.0F  © 2001-2007 Comsenz Inc.