2.6.10内核配置说明
1.使用默认配置文件:删除.config文件
rm .config
make menuconfig
(使用配好的config-2.6.10ok)
2.第一个选项一定要选:对代码成熟度的支持,会多出很多选项(EXPERIMENTAL,NEW,TESTING).
会增加对modem的支持.
3.添加网卡
--Networking support
--Network device support
--Ethernet(10 or 100Mbit)
--EISA,VLB,PCI and on board controllers
<*>National Semiconductor DP8381x series PCI Ethernet support
4.网络配置:
--Networking support
--Network option按照说明配置选项
5.对root=LABEL/的支持:
--Device drivers中一定要选对multi-device以及RAID和device mapper的支持
6.在network option中选上对PPP的支持.
7.对modem的支持:
(1).选上第一项对不成熟代码的支持.
(2).--Device drivers
--Sound
--Advanced Linux Sound Architecture
--PCI devices
< >Intel/SiS/nVidia/AMD MC97 modem(EXPERIMENTAL)
8.USB编进内核:
support for Host-side USB
EHCI HCD
OHCI HCD
UHCI HCI
HID
USB mass storage support
9.Graphics support一定要选,且编进内核:
<*>Support for frame buffer devices(FB)
<*>VGA 16-color graphics support:一定要选
<*>VESA VGA graphics support:一定要选
<*>Intel i810/815 support
<*>use VESA Gerneralized Timing Formula
<*>Intel i830M/845G/852G/855G/865G support
--Console display drive support
VGA text console
<*> Video mode select support
10.不许要选的(机子上没有的硬件驱动不要选):
1.General setup
--Configure standard kernel features(for small systems):一定不能选,否则图形界面无法启动.
1.Prossecor type and features
--Firmware drivers
2.Power manage options
--APM
--CPU frequency scaling
3.Bus options
--PCCARD
--PCI Hotpug and play
4.Device drivers
--Memory Tecnology Devices(MTD)
--Old CD-ROM drivers
--Fusion MPT drivers
--IEEE 1394(Fire Ware)support
--I2O devices support
--Networking support
--Amateur Radio support
--IrDA subsystem support
--Bluetooth subsystem support
--ISDN subsystem support
--Telephony support
--Character devices
--IPMI
--Watchdog card support
--Ftape,the floppy tape device support
--I2C support
--Dallas' 1-wire bus
--misc device support
--Multimedia device support
--Graphics support
--Logo configuration
--USB support
--USB Network Adapters
--USB Serial Converter support
--USB Gadget support
--MMC/SD Card support
5.File systems
--Pseudo filesystems(这两项不能选)
[ ]/dev filesystem support (OBSOLETE)
[ ]/dev/pts Extend Attributes
--Miscellaneous filesystems
--Partition Types
6.Security options
7.Cryptographics options Good!! :mrgreen:
最新的内核阿，我还没用阿，继续加油啊。 i2c不要太可惜了把 好，顶一下 自己编译真是麻烦，失败的可能性也很大，之后还可能出现许多问题。真希望能有高手能详细的介绍下配置，把每一步怎么做，这样做的作用……写的清清楚楚的发表来，让像我这些菜鸟能成功编译出自己的内核。
页:
[1]