求助！还是驱动MODEM的问题！
我近来装了Redhat 9.0，没有升级，是2.4的内核。使用中除了MODEM之外都很正常。经检查，是PCTEL的内猫(HSP56K)，在网上下载了pctel-0.9.7-9.tar.gz的驱动程序安装，安装过程很正常。在KDE的系统信息里也看到MODEM了，用KPPP来拨号，但总是定在“初始化调制调解器”的过程不动了！在WINDOWS里检测MODEM在COM3端口，本来以为是端口问题，但是在KPPP里我试过所有的端口还是不行！
请问是什么问题呀？我也在这里找了很多资料，搞了一个星期了~~~还是不行！各位大虾，可以详细的介绍我应怎样驱动这只猫吗？我是新手，请大家不要见笑了！ :lol:
我的是双系统:Windows XP+RH9
谢谢！ 各位大虾~~
能教教我吗？
在KDE的信息中心里看到芯片是Intel 537的，但是还看到Unknow drive 537有intel for 2.4 驱动，编译安装完后，如果你确认编译安装没有错误，请将dmesg的内容帖出来看看 请问dmesg是什么文件呀?
具体路径在那里??
我的MODEM是PCTEL的,今天试着装了intel-537EP的驱动不行,
再试了intel-537EA_secure-2.27.39.0的驱动,用KPPP可以检测到MODEM了!
但是老是最后提示NO DIALTONE!我的电话线没问题呀,在WINDOWS可以正常使用.
以下是用KPPP拨号的LOG:
ATZ
OK
ATM0L0
OK
ATDT96169
NO DIALTONE
Info center的检测信息:
00:01.6 Modem:Silicon Integrated Systems Intel 537 (rev a0)(prog-if 00 )
Subsystem:Alpha-Top Corp:Unknown device b900
Flags:bus master,medium devsel,latency 32,IRQ 10
I/O ports at dc00
I/O ports at d800
Capabilities: Power Management version 2
00:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Subsystem: Realtek Semiconductor Co., Ltd. RT8139
Flags: bus master, medium devsel, latency 32, IRQ 10
I/O ports at d000
Memory at dffc000 (32-bit, non-prefetchable)
Capabilities: Power Management version 2
MODEM和网卡的中断号一样,有没有影响呀?
如果有,我又应该怎样更改MODEM的中断号呢?
谢谢! # dmesg
Linux version 2.4.20-8 ([email protected]) (gcc version 3.2.2 20030222 (Red Hat Linux 3.2.2-5)) #1 Thu Mar 13 17:54:28 EST 2003
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 0000000006ff0000 (usable)
BIOS-e820: 0000000006ff0000 - 0000000006ff8000 (ACPI data)
BIOS-e820: 0000000006ff8000 - 0000000007000000 (ACPI NVS)
BIOS-e820: 00000000ffef0000 - 00000000fff00000 (reserved)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
0MB HIGHMEM available.
111MB LOWMEM available.
On node 0 totalpages: 28656
zone(0): 4096 pages.
zone(1): 24560 pages.
zone(2): 0 pages.
Kernel command line: ro root=LABEL=/
Initializing CPU#0
Detected 996.787 MHz processor.
Console: colour VGA+ 80x25
Calibrating delay loop... 1985.74 BogoMIPS
Memory: 108660k/114624k available (1347k kernel code, 4684k reserved, 999k data, 132k init, 0k highmem)
Dentry cache hash table entries: 16384 (order: 5, 131072 bytes)
Inode cache hash table entries: 8192 (order: 4, 65536 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 4096 (order: 2, 16384 bytes)
Page-cache hash table entries: 32768 (order: 5, 131072 bytes)
CPU: L1 I cache: 16K, L1 D cache: 16K
CPU: L2 cache: 128K
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383f9ff 00000000 00000000 00000000
CPU: Common caps: 0383f9ff 00000000 00000000 00000000
CPU: Intel Celeron (Coppermine) stepping 0a
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.40 (20010327) Richard Gooch ([email protected])
mtrr: detected mtrr type: Intel
PCI: PCI BIOS revision 2.10 entry at 0xfdb11, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Using IRQ router SIS at 00:01.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS not found.
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS0 at 0x03f8 (irq = 4) is a 16550A
PCI: Found IRQ 10 for device 00:01.6
PCI: Sharing IRQ 10 with 00:05.0
Real Time Clock Driver v1.10e
floppy0: no floppy controllers found
NET4: Frame Diverter 0.46
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
SIS5513: IDE controller at PCI slot 00:00.1
SIS5513: chipset revision 208
SIS5513: not 100% native mode: will probe irqs later
SiS630 ATA 66 controller
ide0: BM-DMA at 0xff00-0xff07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xff08-0xff0f, BIOS settings: hdc:DMA, hdd:DMA
hda: IC25N010ATDA04-0, ATA DISK drive
blk: queue c03c9f40, I/O limit 4095Mb (mask 0xffffffff)
hdc: QSI CD-ROM SCR-242, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 19640880 sectors (10056 MB) w/347KiB Cache, CHS=1222/255/63, UDMA(33)
ide-floppy driver 0.99.newide
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 >
ide-floppy driver 0.99.newide
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 8192 bind 16384)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 146k freed
VFS: Mounted root (ext2 filesystem).
Journalled Block Device driver loaded
kjournald starting.Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 132k freed
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 5 for device 00:01.2
PCI: Sharing IRQ 5 with 00:01.3
usb-ohci.c: USB OHCI at membase 0xc784a000, IRQ 5
usb-ohci.c: usb-00:01.2, Silicon Integrated Systems 7001
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 3 ports detected
PCI: Found IRQ 5 for device 00:01.3
PCI: Sharing IRQ 5 with 00:01.2
usb-ohci.c: USB OHCI at membase 0xc784c000, IRQ 5
usb-ohci.c: usb-00:01.3, Silicon Integrated Systems 7001 (#2)
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 3 ports detected
usb.c: registered new driver hiddev
usb.c: registered new driver hid
hid-core.c: v1.8.1 Andreas Gal, Vojtech Pavlik <[email protected]>
hid-core.c: USB HID support drivers
mice: PS/2 mouse device common for all mice
hub.c: new USB device 00:01.2-1, assigned address 2
input0: USB HID v1.10 Mouse on usb1:2.0
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
Adding Swap: 265032k swap-space (priority -1)
kjournald starting.Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
parport0: PC-style at 0x378
ip_tables: (C) 2000-2002 Netfilter core team
8139too Fast Ethernet driver 0.9.26
PCI: Found IRQ 10 for device 00:05.0
PCI: Sharing IRQ 10 with 00:01.6
divert: allocating divert_blk for eth0
eth0: RealTek RTL8139 Fast Ethernet at 0xc788a000, 00:07:95:a5:09:9c, IRQ 10
eth0:Identified 8139 chip type 'RTL-8139B'
eth0: Setting 100mbps full-duplex based on auto-negotiated partner ability 41e1.
parport0: PC-style at 0x378
lp0: using parport0 (polling).
lp0: console ready
sound disabled
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 77M
agpgart: Detected SiS 630 chipset
agpgart: AGP aperture is 64M @ 0xe0000000
sisfb: Framebuffer at 0xd0000000, mapped to 0xc7cd6000, size 16384k
sisfb: MMIO at 0xdfee0000, mapped to 0xc8cd7000, size 128k
sisfb: Memory heap starting at 8192K
AGP 0.99 on SiS @ 0xe0000000 64MB
Initialized sis 1.0.0 20010503 on minor 0
Trident 4DWave/SiS 7018/ALi 5451,Tvia CyberPro 5050 PCI Audio, version 0.14.10h, 18:00:09 Mar 13 2003
PCI: Found IRQ 11 for device 00:01.4
trident: SiS 7018 PCI Audio found at IO 0xd400, IRQ 11
ac97_codec: AC97 Audio codec, id: ALG16 (ALC200/200P)
ac97_codec: AC97 Modem codec, id: SIL33 (Unknown)
sound disabled 安装过程：
# make clean
cd coredrv; make clean
make: Entering directory `/root/intel-537EA_secure-2.27.39.0/coredrv'
rm -f *.o *~ core
make: Leaving directory `/root/intel-537EA_secure-2.27.39.0/coredrv'
cd serialdrv;make clean
make: Entering directory `/root/intel-537EA_secure-2.27.39.0/serialdrv'
rm -f *.o *~ core
make: Leaving directory `/root/intel-537EA_secure-2.27.39.0/serialdrv'
rm -f *.o
rm -f *.o
# make 537
if [ -a /boot/vmlinuz.version.h ]; then \
cp /boot/vmlinuz.version.h /lib/modules/`uname -r`/build/include/linux/v
ersion.h; fi
if []; then \
cd coredrv; make TARGET=TARGET_CATAWBA KERNEL_SOURCE_PATH= "PSTN_DEF=-DT
ARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537core; \
cd ../serialdrv; make TARGET=TARGET_CATAWBA KERNEL_SOURCE_PATH= card=CARD_TJ320
\
"PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537; \
else \
cd coredrv; make TARGET=TARGET_CATAWBA KERNEL_INCLUDES=/lib/modules/`unam
e -r`/build/include \
"PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537core; \
cd ../serialdrv; make TARGET=TARGET_CATAWBA KERNEL_INCLUDES=/lib/modules
/`uname -r`/build/include card=CARD_TJ320 \
"PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537; \
fi ;
make: Entering directory `/root/intel-537EA_secure-2.27.39.0/coredrv'
cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I /lib/modules/`uname -r`/b
uild/include -I ../inc -fno-common -c -o coredrv.o coredrv.c
coredrv.c: In function `get_pci_info_537':
coredrv.c:198: warning: return makes pointer from integer without a cast
cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I /lib/modules/`uname -r`/b
uild/include -I ../inc -fno-common -c -o clmmain.o clmmain.c
cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I /lib/modules/`uname -r`/b
uild/include -I ../inc -fno-common -c -o rts.o rts.c
cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I /lib/modules/`uname -r`/b
uild/include -I ../inc -fno-common -c -o task.o task.c
cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I /lib/modules/`uname -r`/b
uild/include -I ../inc -fno-common -c -o uart.o uart.c
cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I /lib/modules/`uname -r`/b
uild/include -I ../inc -fno-common -c -o wwh_dflt.o wwh_dflt.c
cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I /lib/modules/`uname -r`/b
uild/include -I ../inc -fno-common -c -o locks.o locks.c
cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I /lib/modules/`uname -r`/b
uild/include -I ../inc -fno-common -c -o afedsp_int.o afedsp_int.c
afedsp_int.c:406: warning: initialization from incompatible pointer type
strip --strip-debug 537core.lib
ld -r coredrv.o clmmain.o rts.o task.o uart.o wwh_dflt.o locks.o afedsp_int.o 53
7core.lib -o 537_core.o
make: Leaving directory `/root/intel-537EA_secure-2.27.39.0/coredrv'
make: Entering directory `/root/intel-537EA_secure-2.27.39.0/serialdrv'
cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I /lib/modules/`uname -r`/b
uild/include -I ../inc -fno-common -c -o softserial.o softserial.c
cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I /lib/modules/`uname -r`/b
uild/include -I ../inc -fno-common -c -o softserial_io.o softserial_io.c
cc -DTARGET_CATAWBA -DTARGET_LINUX -DLINUX -Wall -O -I /lib/modules/`uname -r`/b
uild/include -I ../inc -fno-common -c -o softserial_ioctl.o softserial_ioctl.c
ld -r softserial.o softserial_io.o softserial_ioctl.o -o 537.o
make: Leaving directory `/root/intel-537EA_secure-2.27.39.0/serialdrv'
cp coredrv/537_core.o .
cp serialdrv/537.o .
# make install
if [ -a /boot/vmlinuz.version.h ]; then \
cp /boot/vmlinuz.version.h /lib/modules/`uname -r`/build/include/linux/v
ersion.h; fi
if []; then \
cd coredrv; make TARGET=TARGET_CATAWBA KERNEL_SOURCE_PATH= "PSTN_DEF=-DT
ARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537core; \
cd ../serialdrv; make TARGET=TARGET_CATAWBA KERNEL_SOURCE_PATH= card=CARD_TJ320
\
"PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537; \
else \
cd coredrv; make TARGET=TARGET_CATAWBA KERNEL_INCLUDES=/lib/modules/`unam
e -r`/build/include \
"PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537core; \
cd ../serialdrv; make TARGET=TARGET_CATAWBA KERNEL_INCLUDES=/lib/modules
/`uname -r`/build/include card=CARD_TJ320 \
"PSTN_DEF=-DTARGET_CATAWBA -DTARGET_LINUX -DLINUX" 537; \
fi ;
make: Entering directory `/root/intel-537EA_secure-2.27.39.0/coredrv'
strip --strip-debug 537core.lib
ld -r coredrv.o clmmain.o rts.o task.o uart.o wwh_dflt.o locks.o afedsp_int.o 53
7core.lib -o 537_core.o
make: Leaving directory `/root/intel-537EA_secure-2.27.39.0/coredrv'
make: Entering directory `/root/intel-537EA_secure-2.27.39.0/serialdrv'
ld -r softserial.o softserial_io.o softserial_ioctl.o -o 537.o
make: Leaving directory `/root/intel-537EA_secure-2.27.39.0/serialdrv'
cp coredrv/537_core.o .
cp serialdrv/537.o .
bash 537_inst
running kernel 2.4.20-8
installing hamregistry, used for persistant storage
installing usrsound, a soft buzzer
installing 537 module
installing 537core module
redhat 537_boot rc2.d and rc3.d scripts
starting module and utilities
done 以上的有错吗？
我很菜！
呵呵，谢谢！ 应该驱动起来了，不知道为什么说你的电话线没信号 :neutral: 呀！？
那......还有没有得救呀？？
我在外国网站找到一些资料，说PCTEL-0。9。6的驱动可以用，但是要将sound module disable ，请问如何将sound module禁用？
THANKS！ 呀！？
那......还有没有得救呀？？
我在外国网站找到一些资料，说PCTEL-0。9。6的驱动可以用，但是要将sound module disable ，请问如何将sound module禁用？
THANKS！
这么奇怪的解决方法？ :roll:
这样试试吧，编辑/etc/modules.conf，将里面有关snd的行用#注释掉，应该就不会加载声卡模块了 是真的呀！那些鬼佬真是服了他！URL：http://pctelcompdb.sourceforge.net/viewdetails.php?id_no=223
Displaying detailed information for entry #223
Back
--------------------------------------------------------------------------------
Manufacturer: PCTel
Model: PCtel HSP56 MR
Chipset: SiS 730
Status: Working
Distributions tested: RedHat 9.0
Kernel versions: 2.4.20-8
Driver versions: 0.9.6
Output of lspci -v: 00:01.6 Modem: Silicon Integrated Systems Intel 537 (rev a0) (prog-if 00 )
Subsystem: Silicon Integrated Systems Intel 537
Flags: bus master, medium devsel, latency 64, IRQ 5
I/O ports at d800
I/O ports at d400
Capabilities: Power Management version 2
Output of lspci -n: 00:01.6 Class 0703: 1039:7013 (rev a0)
Owner: Ventsyslav Vassilev
Notes: 1. pctel.o must be force loaded (insmod -f pctel) 2. the sound modules have to be disabled - not working simultaneously :-(( 3. gcc version is 3.2.2 4. Entire output from lspci -v: 00:00.0 Host bridge: Silicon Integrated Systems 730 Host (rev 02) Flags: bus master, medium devsel, latency 32 Memory at d0000000 (32-bit, non-prefetchable) Capabilities: AGP version 2.0 00:00.1 IDE interface: Silicon Integrated Systems 5513 (rev d0) (prog-if 80 ) Subsystem: Silicon Integrated Systems SiS5513 EIDE Controller (A,B step) Flags: bus master, fast devsel, latency 16 I/O ports at ff00 00:01.0 ISA bridge: Silicon Integrated Systems 85C503/5513 Flags: bus master, medium devsel, latency 0 00:01.1 Ethernet controller: Silicon Integrated Systems SiS900 10/100 Ethernet (rev 82) Subsystem: Silicon Integrated Systems SiS900 10/100 Ethernet Adapter Flags: bus master, medium devsel, latency 64, IRQ 5 I/O ports at cc00 Memory at cfff7000 (32-bit, non-prefetchable) Expansion ROM at cffc0000 Capabilities: Power Management version 2 00:01.2 USB Controller: Silicon Integrated Systems SiS7001 USB Controller (rev 07) (prog-if 10 ) Subsystem: Silicon Integrated Systems SiS7001 USB Controller Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at cfffc000 (32-bit, non-prefetchable) 00:01.3 USB Controller: Silicon Integrated Systems SiS7001 USB Controller (rev 07) (prog-if 10 ) Subsystem: Silicon Integrated Systems Onboard USB Controller Flags: bus master, medium devsel, latency 64, IRQ 11 Memory at cfffd000 (32-bit, non-prefetchable) 00:01.4 Multimedia audio controller: Silicon Integrated Systems SiS PCI Audio Accelerator (rev 02) Subsystem: Silicon Integrated Systems SiS PCI Audio Accelerator Flags: bus master, medium devsel, latency 64, IRQ 11 I/O ports at d000 Memory at cfffe000 (32-bit, non-prefetchable) Capabilities: Power Management version 2 00:01.6 Modem: Silicon Integrated Systems Intel 537 (rev a0) (prog-if 00 ) Subsystem: Silicon Integrated Systems Intel 537 Flags: bus master, medium devsel, latency 64, IRQ 5 I/O ports at d800 I/O ports at d400 Capabilities: Power Management version 2 00:02.0 PCI bridge: Silicon Integrated Systems SiS 530 Virtual PCI-to-PCI bridge (AGP) (prog-if 00 ) Flags: bus master, VGA palette snoop, fast devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000a000-0000afff Memory behind bridge: cfe00000-cfefffff Prefetchable memory behind bridge: bfc00000-cfcfffff 01:00.0 VGA compatible controller: Silicon Integrated Systems SiS630 GUI Accelerator+3D (rev 31) (prog-if 00 ) Subsystem: Silicon Integrated Systems SiS630 GUI Accelerator+3D Flags: 66Mhz, medium devsel BIST result: 00 Memory at c0000000 (32-bit, prefetchable) Memory at cfee0000 (32-bit, non-prefetchable) I/O ports at ac00 Capabilities: Power Management version 1 Capabilities: AGP version 2.0 :neutral: 还真有这么奇怪的现象 我的机器本来预装的是红旗LINUX,MODEM在红旗LINUX下也是可以使用的,但是换了REDHAT就不行了
请问还有什么方法可以使用我的MODEM呀? 试试看其它的拨号工具 用MINICOM拨号也一样！
页:
[1]
2