求救,实在搞不出来了，N卡驱动,在NVIDIA上下了最新的
TNT2驱动# XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "Default Layout"
Screen 0"Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# RgbPath is the location of the RGB database.Note, this is the name of the
# file minus the extension (like ".txt" or ".db").There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load"dbe"
Load"extmod"
Load"fbdevhw"
Load"glx"
Load"freetype"
Load"type1"
#Load"dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier"Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier"Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier"DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LXH-GJ15L2"
HorizSync 29.0 - 61.0
VertRefresh55.0 - 75.0
Option "dpms"
EndSection
Section "Device"
Identifier"Videocard0"
Driver "nvidia"
VendorName"Videocard vendor"
BoardName "RIVA TNT2"
VideoRam 32768
EndSection
Section "Screen"
Option "NvAgp" "0"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
具体状况:
1.在SCREEN里面没有Option "NvAgp" "0"的时候，进入X时出现N卡的全屏幕大标记,鼠标移动会留下不褪的拖影。
2.在SCREEN里面加上Option "NvAgp" "0"的时候，可以进入X，但是，速度很慢很慢！鼠标也会拖影，但是会消失，但是也是好慢慢不能用的。
请帮帮忙呀，2。4内核 试试其它的驱动!
Option "NvAGP" "integer"
Configure AGP support. Integer argument can be one of:
0 : disable agp
1 : use NVIDIA's internal AGP support, if possible
2 : use AGPGART, if possible
3 : use any agp support (try AGPGART, then NVIDIA's AGP)
Please note that NVIDIA's internal AGP support cannot
work if AGPGART is either statically compiled into your
kernel or is built as a module, but loaded into your
kernel (some distributions load AGPGART into the kernel
at boot up). Default: 3 (the default was 1 until after
1.0-1251).
用3试试
页:
[1]