~~帖出猫图再求上网解决方法~~ESS2838~~
贵人帮我~~~~~^0^Re: ~~帖出猫图再求上网解决方法~~ESS2838~~
22222 我用的是RH90的~ up :oops: Website of this hardware? 帮你找了一篇文章。:mrgreen:http://www.linuxeden.com/forum/archive/index.php/t-49316.html
http://sidlo.penguin.cz/ES2838/index_en.html 帮你帮找驱动了:
http://www.kingnet.com.cn/horizonal/downloadcenter/modem/internal/Es2838s/Linux.zip 老大~~~我开始就是按照http://sidlo.penguin.cz/ES2838/index_en.html 来做的~但是失败了~等下去试一下http://www.linuxeden.com/forum/archive/index.php/t-49316.html ~~
但是帖子是rh80的,我的是~~rh90~~试试去! 现在还有人用猫…… :shock: # ls
esscom.oesscom_orig.ofixscript17install
# sh fixscript17 esscom_orig.o esscom.o
Fixscript V1.7
doing tty_register_driver_R2f2ffb77 trunc=tty_register_driver new=tty_register_driver_R45d6bc30doing pci_read_config_dword_R1372ae4e trunc=pci_read_config_dword new=pci_read_config_dword_R43e318dedoing pci_read_config_word_R013f4ee4 trunc=pci_read_config_word new=pci_read_config_word_Rd25f3240doing tty_get_baud_rate_R21cd11b3 trunc=tty_get_baud_rate new=tty_get_baud_rate_R2d98e7c0doing tty_unregister_driver_R547fee4f trunc=tty_unregister_driver new=tty_unregister_driver_R150ab4afdoing pci_find_device_R8b4d5816 trunc=pci_find_device new=pci_find_device_R2ec905d7doing pci_write_config_word_Rc7c3e0a9 trunc=pci_write_config_word new=pci_write_config_word_R97d04e11doing __wake_up_R2c77a2af trunc=__wake_up new=__wake_up_Rb76c5f1e
doing pci_write_config_dword_Raf4ae244 trunc=pci_write_config_dword new=pci_write_config_dword_R7fbf61badoing interruptible_sleep_on_R15e26425 trunc=interruptible_sleep_on new=interruptible_sleep_on_R7e4f89c3doing tty_flip_buffer_push_R4e864e97 trunc=tty_flip_buffer_push new=tty_flip_buffer_push_R0d314476doing tty_hung_up_p_R0423a087 trunc=tty_hung_up_p new=tty_hung_up_p_R4a18a9be
# ls
esscom.oesscom_orig.ofixscript17install
# sh install
esscom.o: The module you are trying to load (esscom.o) is compiled with a gcc
version 2 compiler, while the kernel you are running is compiled with
a gcc version 3 compiler. This is known to not work.
/dev/essmodem
/dev/modem 偶也用猫啊~~~~在家里,没安宽带。。。 这个卡做得不错
# sh install
esscom.o: The module you are trying to load (esscom.o) is compiled with a gcc
version 2 compiler, while the kernel you are running is compiled with
a gcc version 3 compiler. This is known to not work.
错误提示很明显,你的内核所用的gcc版本和你的驱动模块gcc版本不一致,建议下载驱动源码重新编译 e问 很 很重要啦 8)
页:
[1]