怎样设置1024*768的分辨率
我的FC3系统,显示器的分辨率只有800*600和680*480,刷新率也只有60在GNOME中显示器的类型不能设置,显示器类型为Unknown monitor,显卡正常
请问如何解决?
我刚刚从Windows转到Linux,可能问题很低级,但是我找了一天也没找到!
希望各位帮忙啊,现在因为分辨率很低,看的眼睛疼啊,这个问题不解决,没法干别的了! 忘说了,我的显示器是BenQ的,显卡是GF2 Ti的 搜索一下论坛，老问题。 呵呵,我也是的,# XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "Default Layout"
Screen 0"Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database.Note, this is the name
of the
# file minus the extension (like ".txt" or ".db").There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated
together)
# By default, Red Hat 6.0 and later now use a font server independent
of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load"dbe"
Load"extmod"
Load"fbdevhw"
Load"glx"
Load"record"
Load"freetype"
Load"type1"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier"Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier"Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier"DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Unknown monitor"
HorizSync 31.5 - 37.9
VertRefresh50.0 - 70.0
Option "dpms"
EndSection
Section "Device"
Identifier"Videocard0"
Driver "nv"
VendorName"Videocard vendor"
BoardName "NVIDIA GeForce 4 MX (generic)"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection 不好意思,都整上去了,谢谢了,指点一下 呵呵。。。首先要安装显卡驱动程序。。。
然后，按照其中的example的说明修改XF86config(在FC3中是Xorg.conf)
就可以了
看看精华区吧
有更详细地介绍 我也遇到过这种问题，我怎么也不能调成１０２４＊７６８的分辨率
之前我的显示器是未检测的显示器，后来我把显示器改为ＤＥＬＬ的一个型号的
我的就是ＤＥＬＬ的，然后就可以调成１０２４＊７６８了
你可以试一试！！～～
HorizSync 31.5 - 37.9
VertRefresh 50.0 - 70.0
HORIZ就是水平刷新率，VERTI就是垂直刷新率就是我们常说的刷新率，如果VERTI最大修改后还是达不到，可以适当增大HORIZ的最大值
多试几次吧，一般只要不是太老的显示器VERT设为85就可以了 多谢各位了,本人十分感谢
页:
[1]