skyeye问题请教
我编译了uClinux2.4内核后用skyinsight启动,结果run时产生如下输出,请问这是怎么回事啊,很郁闷中root@XUKAI imaes]# skyinsight ../linux-2.4.x/linux
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x81818e0
SKYEYE: use arm7100 mmu ops
Loaded ROM ./romfs.img
Linux version 2.4.24-uc0 (root@XUKAI) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #3 四 4月 14 21:52:11 CST 2005
Processor: Atmel AT91M40xxx revision 0
Architecture: EB01
On node 0 totalpages: 1024
zone(0): 0 pages.
zone(1): 1024 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0
Calibrating delay loop... 15.82 BogoMIPS
Memory: 4MB = 4MB total
Memory: 3404KB available (439K code, 157K data, 36K init)
Dentry cache hash table entries: 512 (order: 0, 4096 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 1024 (order: 0, 4096 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Atmel USART driver version 0.99
ttyS0 at 0xfffd0000 (irq = 2) is a builtin Atmel APB USART
ttyS1 at 0xfffcc000 (irq = 3) is a builtin Atmel APB USART
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 1400000-13FFFFF (RO)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Blkmem: bad access: block=0, count=2 (pos=400, len=0)
end_request: I/O error, dev 1f:00 (Blkmem), sector 0
romfs: unable to read superblock
Kernel panic: VFS: Unable to mount root fs on 1f:00
sim_info called
# vi skyeye.conf
# skyinsight ../linux-2.4.x/linux
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x81818e0
SKYEYE: use arm7100 mmu ops
Loaded ROM ../images/romfs.img
Linux version 2.4.24-uc0 (root@XUKAI) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #3 四 4月 14 21:52:11 CST 2005
Processor: Atmel AT91M40xxx revision 0
Architecture: EB01
On node 0 totalpages: 1024
zone(0): 0 pages.
zone(1): 1024 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0
Calibrating delay loop... 15.82 BogoMIPS
Memory: 4MB = 4MB total
Memory: 3404KB available (439K code, 157K data, 36K init)
Dentry cache hash table entries: 512 (order: 0, 4096 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 1024 (order: 0, 4096 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Atmel USART driver version 0.99
ttyS0 at 0xfffd0000 (irq = 2) is a builtin Atmel APB USART
ttyS1 at 0xfffcc000 (irq = 3) is a builtin Atmel APB USART
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 1400000-13FFFFF (RO)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Blkmem: bad access: block=0, count=2 (pos=400, len=0)
end_request: I/O error, dev 1f:00 (Blkmem), sector 0
romfs: unable to read superblock
Kernel panic: VFS: Unable to mount root fs on 1f:00
页:
[1]