移植armlinux到skyeye平台遇到得问题
第一个问题：在cp －dpR/dev /mnt/img/dev
得时候 有几个文件提示没有这个文件和目录
比如说arp cua4 socket udp
这是怎么回事啊？为什么我得dev没有nie？我得redhat9明明是完全安装了啊？
各位得linux下有这些文件么？
第二个问题
呵呵，估计主要是第一个问题没有解决得事，最后作出来得根文件系统在skyeye平台上运行不起来，出现下面得提示
(SkyEye) run
Starting program: /root/arm_skyeye/vmlinux
Linux version 2.4.18-rmk7 (root@zsa) (gcc version 2.95.3 20010315 (release)) #5
18 09:15:28 CST 2005
CPU: ARM ARM720T revision 0
Machine: Cirrus Logic 7212/7312
Warning: bad configuration page, trying to continue
On node 0 totalpages: 4096
zone(0): 4096 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/ram
Calibrating delay loop... 26.00 BogoMIPS
Memory: 16MB = 16MB total
Memory: 13080KB available (750K code, 166K data, 44K init)
Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes)
Inode-cache hash table entries: 1024 (order: 1, 8192 bytes)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 4096 (order: 2, 16384 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
ttyAM0 at I/O 0x100 (irq = 12) is a CLPS711x
ttyAM1 at I/O 0x1100 (irq = 28) is a CLPS711x
block: 64 slots per queue, batch=16
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 1024 bind 1024)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 1024 blocks into ram disk... done.
Freeing initrd memory: 2048K
EXT2-fs warning: mounting unchecked fs, running e2fsck is recommended
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 44K
Warning: unable to open an initial console.
第三个问题：
我做得这个根文件系统是不是可以运用到其他得平台上啊，比如我现在要一直linux到arm板上，就差根文件系统了，直接用这个应该可以吧！？
多谢！！！！！！了
呵呵
页:
[1]