synaptics笔记本触摸板驱动安装及其它
1、检测电脑中是否安装有synaptics触摸板# dmesg | grep -i Synaptic
Synaptics Touchpad, model: 1
input: SynPS/2 Synaptics TouchPad on isa0060/serio2
我的本本提示如上。
2、下载安装synaptics X11驱动synaptics-0.14.1.tar.bz2
到google中搜一下到处都是
http://mirror.gentoo.gr.jp/distfiles/synaptics-0.14.1.tar.bz2
安装：
解压
./configure --prefix=/usr
make
make install
3、配置X11配置文件（xorg.conf或XF86Config）
a.
Section "Module"
...
Load "synaptics" #添加触摸板x11模块
EndSection
b.
#新建触摸板输入设备
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "SendCoreEvents"
Option "Device" "/dev/input/event1" #关于这个的判断请看下面
Option "Protocol" "event"
# Next line required only if you want to disable the
# mousepad while typing:
Option "SHMConfig" "on"
# The rest of the options are NOT required, just a default
# similar to the Windows drivers with non of the extra features.
Option "LeftEdge" "1900"
Option "RightEdge" "5400"
Option "TopEdge" "1400"
Option "BottomEdge" "4500"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.02"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0010"
EndSection
说明：Option "Device"的判断
ls /dev/input/event*
依此调用
cat /dev/input/eventX
此时移动触摸板看看cat是否有输出，如果有输出说明该/dev/input/eventX
即为你的触摸板输出设备，将该设备路径添加到上面Option "Device"中
我的为：Option "Device" "/dev/input/event1"
c.
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Touchpad" #将触摸板设备添加到此处
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
3、下载并安装KDE控制中心touchpad控制模块
ksynaptics-0.2.0.tar.bz2
http://qsynaptics.sourceforge.net/ksynaptics-0.2.0.tar.gz
下载解压
./configure --prefix=/usr
make
make install
重启X后，登陆kde。控制中心 -> 外设 中就会看到一个Touch pad
该模块中提供了touchpad的开启关闭，灵敏度和其它一些功能。 我的X11配置文件（XF86Config）
# XFree86 4 configuration created by MagicInstaller.
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Touchpad"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/TTF"
FontPath "/usr/share/fonts/default/Type1"
FontPath "/usr/share/fonts/ttf/zh_CN"
FontPath "/usr/local/share/fonts"
FontPath "/usr/share/fonts"
FontPath "/usr/X11R6/lib/X11/fonts"
FontPath "/usr/share/fonts/default"
FontPath "/usr/share/fonts/override"
FontPath "/usr/share/fonts/pcf"
FontPath "/usr/share/fonts/ttf"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/OTF"
FontPath "/usr/X11R6/lib/X11/fonts/Speedo"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XbkModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
# Modified by mouseconfig
Driver "mouse"
Option "Device" "/dev/psaux"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "SendCoreEvents"
Option "Device" "/dev/input/event1"
Option "Protocol" "event"
# Next line required only if you want to disable the
# mousepad while typing:
Option "SHMConfig" "on"
# The rest of the options are NOT required, just a default
# similar to the Windows drivers with non of the extra features.
Option "LeftEdge" "1900"
Option "RightEdge" "5400"
Option "TopEdge" "1400"
Option "BottomEdge" "4500"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.02"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0010"
EndSection
#Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
# Identifier "DevInputMice"
# Driver "mouse"
# Option "Protocol" "PS/2"
# Option "Device" "/dev/input/mice"
# Option "ZAxisMapping" "4 5"
# Option "Emulate3Buttons" "no"
#EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1024x768"
HorizSync 31.5 - 48.5
VertRefresh 40.0 - 70.0
EndSection
Section "Device"
Identifier "Videocard0"
Driver "radeon"
VendorName "Videocard vendor"
BoardName "ATI Radeon Mobility M9"
VideoRam 131072
EndSection
Section "Device"
Identifier"ATI Radeon Mobility 9600 M10"
Driver "radeon"
VendorName"ati"
BoardName "Unknown"
#VideoRam 131072
#Option "nodri"
# Insert Clocks lines here if appropriate
EndSection
Section "Screen"
Identifier "Screen0"
Device "ATI Radeon Mobility 9600 M10"
Monitor "Monitor0"
DefaultColorDepth 32
DefaultDepth 24
SubSection "Display8"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display15"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display16"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display24"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
页:
[1]