FC4下怎么安装网卡
nForce2 自带的一个IC Plus IP1000 的千兆网卡， FC4认不出来。找到了它的Linux驱动，但不知道怎么装。（还有一块realtek8139倒支持得很好）麻烦各位大佬们给我这个新人扫扫盲。（readme 里有如下语句
“for kernel 2.6.x
-------------------
#make all=> generate ipg.ko
#insmod ./ipg.ko
#ifconfig eth0 xxx.xxx.xxx.xxx netmask yyy.yyy.yyy.yyy”
照命令打了说参数错误。） 先不装吧，这个一两句说不清楚，多看别人的文章，几个月后就会了 Here it is:
IC Plus IP1000 Gigabit Ethernet Adapter
Linux driver
Contents:
-----------
1. File Description
2. Driver Installation for Linux
3. Jumbo Support
1. File Description
-------------------
Filename Description
==================== =======================================================
ipg.c IC Plus IP1000 Linux Driver Source Code.
This file is the main part of IP1000 Linux Driver.
makefile Make File For IP1000 Linux Driver.
Using "make all", "make smp", "make bigmem" for your
kernel.
make2.2.sh Make Shell Script For Linux 2.2.x Kernel.
make2.2mod.sh Make Shell Script For Linux 2.2.x Kernel.
PhyParam.h IP1000 Hardware Parameters modification file.
It would have new version for new version of NIC on IC
Plus web site.
ipg_tune.h Include File For IP1000 Linux Driver.
ipg_structs.h Include File For IP1000 Linux Driver.
ipg_macros.h Include File For IP1000 Linux Driver.
ipg_constants.h Include File For IP1000 Linux Driver.
readme.txt A summary of the contents for Linux Driver.
This file, which you are reading me now.
2. Driver Installation for Linux
-----------------------------------------
a. for kernel 2.4.x
a1. Redhat 7.3 (linux kernel 2.4.18)
a2. Mandrake 8.1 (kernel 2.4.8)
b. for kernel 2.6.x
c. for bigmem and smp.
a.for kernel 2.4.x
-------------------
a1. Redhat 7.3 (linux kernel 2.4.18)
a1.1. install way 1:
#make all =>generate ipg.o
#cp ipg.o /lib/modules/2.4.18-3/kernel/drivers/net/
#insmod ./ipg.o
#ifconfig eth0 xxx.xxx.xxx.xxx netmask yyy.yyy.yyy.yyy
eth0 is your network adapter,use "dmesg" to check it,
ex: eth0, eth1...
xxxis your ip address, ex: 192.168.102.211
yyyis your netmask address, ex:255.255.255.0
a1.2.install way 2:
#make all =>generate ipg.o
#cp ipg.o /lib/modules/2.4.18-3/kernel/drivers/net/
#insmod ./ipg.o
#setup
=>to setup your ip address
#ifup eth0
eth0 is your network adapter, ex: eth0, eth1...
a2. Mandrake 8.1 (kernel 2.4.8)
#make all=> generate ipg.o
#cp ipg.o /lib/modules/2.4.8-26mdk/kernel/drivers/net
#insmod ./ipg.o
#ifconfig eth0 xxx.xxx.xxx.xxx netmask yyy.yyy.yyy.yyy
eth0 is your network adapter,use "dmesg" to check it,
ex: eth0, eth1...
xxxis your ip address, ex: 192.168.102.211
yyyis your netmask address, ex:255.255.255.0
b. for kernel 2.6.x
-------------------
#make all=> generate ipg.ko
#insmod ./ipg.ko
#ifconfig eth0 xxx.xxx.xxx.xxx netmask yyy.yyy.yyy.yyy
eth0 is your network adapter,use "dmesg" to check it, ex: eth0, eth1...
xxxis your ip address, ex: 192.168.102.211
yyyis your netmask address, ex:255.255.255.0
c. for bigmem and smp.
----------------------
c1. If your kernel was in bigmem, using:
#make bigmem
c2. If your kernel was in smp, using:
#make smp
3. Jumbo Support
----------------------
In Makefile:
3.1. Open Jumbo Support:
MAPPING_MODE= -DUSE_IO_OPS -DJUMBO_FRAME
3.2. Close Jumbo Support
MAPPING_MODE= -DUSE_IO_OPS
3.3. Jumbo Support for RX 4K and TX 12K b. for kernel 2.6.x
-------------------
#make all => generate ipg.ko
#insmod ./ipg.ko
#ifconfig eth0 xxx.xxx.xxx.xxx netmask yyy.yyy.yyy.yyy
eth0 is your network adapter,use "dmesg" to check it, ex: eth0, eth1...
xxx is your ip address, ex: 192.168.102.211
yyy is your netmask address, ex:255.255 我有照这个打，以root用户登陆。但第一行就提示参数不对 给个下在地址 地址？ email:[email protected] #cd 你的驱动目录
#make all
#insmod ./ipg.ko
重启
页:
[1]