KDSL不能用
自从我装了ML，kdsl就几乎没正常过。装了N遍也没用，我该怎么办？它总是说：pppd 无法识别 options 文件里的任何一个选项。
请查看日志文件以获取更多信息。
日志在哪里？下面这个是吗？
[root@MagicLinux ~]# dmesg
or: Method execution failed [\_SB_.PCI0.IDE0.PRIM.SLAV._STA] (Node c126fae0), AE_NOT_EXIST
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.IDE0.PRIM.SLAV._STA] (Node c126fae0), AE_NOT_EXIST
ACPI-0265: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BRID] (Node c126fcc0), AE_NOT_EXIST
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BRII] (Node c126fce0), AE_NOT_EXIST
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BRPC] (Node c126fd20), AE_NOT_EXIST
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node c126faa0), AE_NOT_EXIST
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.IDE0.SCND.MSTR._STA] (Node c126faa0), AE_NOT_EXIST
ACPI-0265: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BLID] (Node c126ff00), AE_NOT_EXIST
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BLII] (Node c126ff20), AE_NOT_EXIST
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BLPC] (Node c126ff60), AE_NOT_EXIST
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BSTA] (Node c126f280), AE_NOT_EXIST
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node c126f5c0), AE_NOT_EXIST
ACPI-0158: *** Error: Method execution failed [\_SB_.PCI0.USB0.URTH.UNST._STA] (Node c126f5c0), AE_NOT_EXIST
ACPI-0265: *** Error: Region EmbeddedControl(3) has no handler
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BRID] (Node c126fcc0), AE_NOT_EXIST
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BRII] (Node c126fce0), AE_NOT_EXIST
ACPI-1138: *** Error: Method execution failed [\_SB_.PCI0.LPC_.EC__.BRPC] (Node c126fd20), AE_NOT_EXIST
ACPI-1138: *** Error: Method execution failed [\_SB_.NEST._STA] (Node c126f900), AE_NOT_EXIST
ACPI-0158: *** Error: Method execution failed [\_SB_.NEST._STA] (Node c126f900), AE_NOT_EXIST
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Embedded Controller [EC] (gpe 28)
ACPI: Power Resource [PUBS] (on)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq".If it helps, post a report
Simple Boot Flag at 0x35 set to 0x1
Machine check exception polling timer started.
IBM machine detected. Enabling interrupts during APM calls.
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
apm: overridden by ACPI.
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFS: nTxBlock = 1981, nTxLock = 15848
SGI XFS with large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
vesafb: framebuffer at 0xe8000000, mapped to 0xd0980000, using 6144k, total 65472k
vesafb: mode is 1024x768x16, linelength=2048, pages=41
vesafb: protected mode interface info at c000:5613
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size 36270 bytes,<6>...found (1024x768, 19600 bytes, v3).
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
ACPI: AC Adapter [AC] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
ACPI: Processor [CPU] (supports 8 throttling states)
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel i845 Chipset.
agpgart: AGP aperture is 64M @ 0xe0000000
[drm] Initialized drm 1.0.0 20040925
intelfb: Framebuffer driver for Intel(R) 830M/845G/852GM/855GM/865G/915G chipsets
intelfb: Version 0.9.2
PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing enabled
pnp: Device 00:09 activated.
ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
PCI: setting IRQ 11 as level-triggered
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Linux video capture interface: v1.00
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH3M: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
ICH3M: chipset revision 2
ICH3M: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: IC25T060ATCS05-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: HL-DT-STCD-RW/DVD DRIVE GCC-4160N, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
Probing IDE interface ide3...
Probing IDE interface ide4...
Probing IDE interface ide5...
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/1768KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes not supported
hda: hda1 hda2 hda3 < hda5 hda6 hda7 hda8 >
libata version 1.11 loaded.
ieee1394: Initialized config rom entry `ip1394'
usbmon: debugs is not available
mice: PS/2 mouse device common for all mice
md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
EISA: Probing bus 0 at eisa.0
NET: Registered protocol family 26
NET: Registered protocol family 2
input: AT Translated Set 2 keyboard on isa0060/serio0
IP: routing cache hash table of 2048 buckets, 16Kbytes
TCP established hash table entries: 16384 (order: 5, 131072 bytes)
TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
TCP: Hash tables configured (established 16384 bind 16384)
Initializing IPsec netlink socket
NET: Registered protocol family 1
NET: Registered protocol family 17
ACPI wakeup devices:
LID SLPB PCI0 UART PCI1 USB0 USB1 USB2 AC97
ACPI: (supports S0 S3 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
RAMDISK: incomplete write (-28 != 32768) 4194304
ReiserFS: hda5: found reiserfs format "3.6" with standard journal
input: PS/2 Generic Mouse on isa0060/serio1
ReiserFS: hda5: using ordered data mode
ReiserFS: hda5: journal params: device hda5, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda5: checking transaction log (hda5)
ReiserFS: hda5: replayed 46 transactions in 12 seconds
ReiserFS: hda5: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 284k freed
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
Floppy drive(s): fd0 is 1.44M
FDC 0 is a National Semiconductor PC87306
e100: Intel(R) PRO/100 Network Driver, 3.4.8-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 11
ACPI: PCI Interrupt 0000:02:08.0[A] -> Link [LNKE] -> GSI 11 (level, low) -> IRQ 11
e100: eth0: e100_probe: addr 0xd0200000, irq 11, MAC addr 00:D0:59:CC:FF:0A
orinoco 0.14alpha2 (David Gibson <[email protected]>, Pavel Roskin <[email protected]>, et al)
orinoco_pci 0.14alpha2 (Pavel Roskin <[email protected]>, David Gibson <[email protected]> & Jean Tourrilhes <[email protected]>)
ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
orinoco_pci: Detected device 0000:02:02.0, mem:0xf8000000-0xf8000fff, irq 11
eth1: Hardware identity 8013:0000:0001:0000
eth1: Station identity001f:0006:0001:0003
eth1: Firmware determined as Intersil 1.3.6
eth1: Ad-hoc demo mode supported
eth1: IEEE standard IBSS ad-hoc mode supported
eth1: WEP supported, 104-bit key
eth1: MAC address 00:20:E0:8E:3E:11
eth1: Station name "PrismI"
eth1: ready
ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49367 usecs
intel8x0: clocking to 48000
ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1f.6 to 64
hw_random hardware driver 1.0.0 loaded
USB Universal Host Controller Interface driver v2.2
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: Intel Corporation 82801CA/CAM USB (Hub #1)
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: Intel Corporation 82801CA/CAM USB (Hub #2)
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: Intel Corporation 82801CA/CAM USB (Hub #3)
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
ohci1394: $Rev: 1250 $ Ben Collins <[email protected]>
ACPI: PCI Interrupt 0000:02:00.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11
usb 2-1: new low speed USB device using uhci_hcd and address 2
ohci1394: fw-host0: OHCI-1394 1.0 (PCI): IRQ=[11]MMIO=[d0201000-d02017ff]Max Packet=[2048]
ieee1394: Host added: ID:BUS[0-00:1023]GUID[00061b0010040d9b]
input: Logitech Optical USB Mouse on usb-0000:00:1d.1-1
usbcore: registered new driver usbmouse
drivers/usb/input/usbmouse.c: v1.6:USB HID Boot Protocol mouse driver
usbcore: registered new driver hiddev
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.01:USB HID core driver
ts: Compaq touchscreen protocol output
ibm_acpi: IBM ThinkPad ACPI Extras v0.8
ibm_acpi: http://ibm-acpi.sf.net/
ibm_acpi: dock device not present
ACPI: Thermal Zone [THM0] (51 C)
ACPI: Video Device [VID] (multi-head: yesrom: nopost: no)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NTFS driver 2.1.22 [Flags: R/W MODULE].
NTFS-fs warning (device hda1): parse_options(): Option iocharset is deprecated. Please use option nls=<charsetname> in the future.
NTFS volume version 3.1.
NTFS-fs error (device hda1): load_system_files(): Volume has unsupported flags set.Mounting read-only.Run chkdsk and mount in Windows.
NTFS-fs error (device hda1): ntfs_check_logfile(): Did not find two restart pages in $LogFile.
NTFS-fs warning (device hda1): load_system_files(): Failed to load $LogFile.Will not be able to remount read-write.Mount in Windows.
FAT: bogus number of reserved sectors
VFS: Can't find a valid FAT filesystem on dev hda6.
Unable to find swap-space signature
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
pnp: Device 00:0a disabled.
Linux Kernel Card Services
options:[pci] [cardbus] [pm]
pnp: Device 00:0a activated.
parport: PnPBIOS parport detected.
parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
lp0: console ready
codec_semaphore: semaphore is not ready [0x1][0x301300]
codec_write 1: semaphore is not ready for register 0x54
mtrr: 0xe8000000,0x4000000 overlaps existing 0xe8000000,0x2000000
ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11
[drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI Technologies Inc Radeon RV200 LX [Mobility FireGL 7800 M7]
mtrr: 0xe8000000,0x4000000 overlaps existing 0xe8000000,0x2000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
codec_semaphore: semaphore is not ready [0x1][0x300300]
codec_read 0: semaphore is not ready for register 0x2c
codec_semaphore: semaphore is not ready [0x1][0x300300]
codec_write 0: semaphore is not ready for register 0x2
codec_semaphore: semaphore is not ready [0x1][0x300300]
codec_read 0: semaphore is not ready for register 0x2c
mtrr: 0xe8000000,0x4000000 overlaps existing 0xe8000000,0x2000000
mtrr: 0xe8000000,0x4000000 overlaps existing 0xe8000000,0x2000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
codec_semaphore: semaphore is not ready [0x1][0x300300]
codec_write 0: semaphore is not ready for register 0x2
codec_semaphore: semaphore is not ready [0x1][0x300300]
codec_read 0: semaphore is not ready for register 0x2c
mtrr: 0xe8000000,0x4000000 overlaps existing 0xe8000000,0x2000000
mtrr: 0xe8000000,0x4000000 overlaps existing 0xe8000000,0x2000000
agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
codec_semaphore: semaphore is not ready [0x1][0x300300]
codec_write 0: semaphore is not ready for register 0x2
codec_semaphore: semaphore is not ready [0x1][0x300300]
codec_read 0: semaphore is not ready for register 0x2c
e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
[root@MagicLinux ~]#
我的也是这样,只能在命令行用adsl-start了.
如果不行的话,先用adsl-setup设置一下,断线用adsl-stop,可以用adsl-status看是否有连接.
你没有编译过内核吧? 以前有贴子讨论过,请看以前的贴子 注意你的网卡，8139too 有没有识别成 8139cp！看疑难解答：
页:
[1]