请问KDE下怎么输入:双引号:?
字符界面下正常,但是KDE下输入双引号,波浪,6上面的箭头都不行,这是为什么呢? maby it's not kde's problem, i get another keyboard and every thing is OK.but now i can't find my fcitx any more, and have to type English :( 手动启动fcitx
运行fcitx 是的, 确实是fcitx的问题,因为我昨天不小心把fcitx弄丢以后,输入就正常了,但是......但是......手工启动的fcitx不能用:(...... 重新安装fanx1.1,输入法正常,双引号.波浪号又不能输入了.汗.........这次我用的可是标准104键盘哦 fcitx并非屏蔽了波浪号,双引号等键,而是使用的全角标点符号,例如:双引号==\204\244
希望老大弄个3.1.1的fcitx的mo出来就好!! 我的fanx至今仍然不能输入双引号:( HELP 试试skim模块，相信能解决问题。 还是不行哦，按下单引号以后，系统如下反应：0x28,0xa8应该是单引号的键值吧
还有就是连续按2次双引号，会出现一个这样的双引号：¨
－－－－－－－－－－－－－－－－－－－－－－－
showkey version 1.12
usage: showkey
valid options are:
-h --help display this help text
-a --ascii display the decimal/octal/hex values of the keys
-s --scancodesdisplay only the raw scan-codes
-k --keycodes display only the interpreted keycodes (default)
root@slax:~# showkey -s
kb mode was RAW
[ if you are trying this under X, it might not work
since the X server is also reading /dev/console ]
press any key (program terminates 10s after last keypress)...
0x9c
0x28 0xa8
root@slax:~# showkey -k
kb mode was RAW
[ if you are trying this under X, it might not work
since the X server is also reading /dev/console ]
press any key (program terminates 10s after last keypress)...
keycode28 release
keycode40 press
keycode40 release
root@slax:~# 我是在网上找到的,我用了好用,大体使用方法是:
修改/etc/X11/xorg.conf，在键盘(keyboard)一节加入以下语句：
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
Option "XkbKeymap" "xfree86"
EndSection Identifier "Keyboard0" 这里我的机器与介绍的不同,我的是
Identifier "Keyboard" 你用一下看一看,我用LINUX时间不长,请多多指教 Identifier "Keyboard1" 问题同上呀"""""""""""
页:
[1]