这个数值怎么确定？ 我的也是液晶显示,
我装fc1就可以改刷新频率 但是装fc4就不可以了 我的是FC4,装在笔记本上,楼上几位说的我都试了,不行啊 :cry: 我也有這個問題
天啊 , 我現在的情況可以說一開了 Fedora4就不可以關機
一關了機就要重新設定 Grub 中的 vga=0x31?
如何不更換 vga 的數字
就會 出現 白色一遍的 Screen
http://www.jesslam.net/~billyim/105_0101/IMGP0833.JPG
http://www.jesslam.net/~billyim/105_0101/IMGP0835.JPG
按 Ctrl+Alt+F2 想去 DOS 也是這個樣子 = ="
http://www.jesslam.net/~billyim/105_0101/IMGP0836.JPG
重新設定 Grub 中的 vga=0x317 後 , 會回復正常
http://www.jesslam.net/~billyim/105_0101/IMGP0838.JPG
http://www.jesslam.net/~billyim/105_0101/IMGP0840.JPG
http://www.jesslam.net/~billyim/105_0101/IMGP0842.JPG
但是再次重新啟動後 , 又回到了 白色一遍的 Screen 什麼都看不到
以下是我的 xorg . conf不知道哪裡出錯了 , 請各位大大 教教我這菜鳥
# XFree86 4 configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database.Note, this is the name of the
# file minus the extension (like ".txt" or ".db").There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load"dbe"
Load"extmod"
Load"fbdevhw"
Load"glx"
Load"record"
Load"freetype"
Load"type1"
Load"synaptics"
Load"dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier"Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier"Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "InputDevice"
Identifier"Synaptics"
Driver "synaptics"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto-dev"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1024x768"
HorizSync 31.5 - 48.5
VertRefresh40.0 - 70.0
Option "dpms"
EndSection
Section "Device"
Identifier"Videocard0"
Driver "radeon"
VendorName"Videocard vendor"
Option "no_accel"
BoardName "ATI Radeon Mobility 7500"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
kernel项不要vga项行不 :?: :cry:不要也是一樣的
要有畫面就一定要重新設定 Grub 才可以
相同的設定不可以出現第二次:cry:
页:
1
[2]