求助！！ startx 以后，屏幕中间出现白色方块，死机。。
我的安装步骤# hdparm -d 1 -A 1 -m 16 -u 1 -a 64 /dev/hda
# /etc/init.d/sshd start
# net-setup eth0
----------------------------------------------------------------
ssh 喽
----------------------------------------------------------------
# mke2fs -j /dev/hda7
# mkswap /dev/hda8
# swapon /dev/hda8
# mount /dev/hda7 /mnt/gentoo
# mkdir /mnt/gentoo/boot
# cd /mnt/gentoo
# tar -xvjpf /mnt/cdrom/stages/stage3-x86-2005.1.tar.bz2
# tar -xvjf /mnt/cdrom/snapshot/portage-2005.1.tar.bz2 -C /mnt/gentoo/usr
# mkdir /mnt/gentoo/usr/portage/distfiles
# cp /mnt/cdrom/distfiles/* /mnt/gentoo/usr/portage/distfiles/
# mount -t proc none /mnt/gentoo/proc
# cp -L /etc/resolv.conf /mnt/gentoo/etc/resolv.conf
# chroot /mnt/gentoo /bin/bash
# env-update
# source /etc/profile
# ln -sf /usr/share/zoneinfo/Asia/Shanghai /etc/localtime
# emerge gentoo-sources
# cd /usr/src/linux
# make menuconfig
# make && make modules_install
# cp arch/i386/boot/bzImage /boot/bzImage
# nano -w /etc/fstab
# nano -w /etc/conf.d/hostname
# nano -w /etc/conf.d/net
config_eth0=( "192.168.1.210 netmask 255.255.255.0" )
routes_eth0=( "default gw 192.168.1.1" )
# rc-update add net.eth0 default
# passwd
# nano -w /etc/conf.d/clock
# emerge syslog-ng
# rc-update add syslog-ng default
# emerge vixie-cron
# rc-update add vixie-cron default
# emerge slocate
# nano -w /etc/conf.d/local.start
hdparm -d 1 -A 1 -m 16 -u 1 -a 64 /dev/hda
/etc/init.d/sshd start
# emerge grub
# cp /boot/grub/grub.conf.sample /boot/grub/grub.conf
# nano -w /boot/grub/grub.conf
# cp /proc/mounts /etc/mtab
# grub
grub> root (hd0,6) (Specify where your /boot partition resides)
grub> setup (hd0) (Install GRUB in the MBR)
grub> quit (Exit the GRUB shell)
# exit
cdimage ~# cd
cdimage ~# umount /mnt/gentoo/boot /mnt/gentoo/proc /mnt/gentoo
cdimage ~# reboot
-------------------------
Login: root
Password: (Your root password)
# useradd -m -G users,wheel,audio -s /bin/bash john
# passwd john
Password: (Enter the password for john)
Re-enter password: (Re-enter the password to verify)
$ su -
Password: (Enter your root password)
# mount /mnt/cdrom
# export PKGDIR="/mnt/cdrom"
# emerge --usepkgonly xorg-x11
# emerge --usepkgonly gnome
# Xorg -configure
# nano -w /root/xorg.conf.new
# echo "exec gnome-session" > ~/.xinitrc
问题： X －config /root/xorg.conf.new 通过
startx 以后，屏幕中间出现白色方块，死机。。。。。。。。。
我的配置文件：
tux ~ # cat xorg.conf.new
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/lib/X11/rgb"
ModulePath "/usr/lib/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/CID/"
FontPath "/usr/share/fonts/75dpi/"
FontPath "/usr/share/fonts/100dpi/"
EndSection
Section "Module"
Load "extmod"
Load "dbe"
Load "dri"
Load "record"
Load "xtrap"
Load "glx"
Load "type1"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
EndSection
Section "Monitor"
#DisplaySize 320 240 # mm
Identifier "Monitor0"
VendorName "GSM"
ModelName ""
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### : arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "i810"
VendorName "Intel Corp."
BoardName "82845G/GL Chipset Integrated Graphics Device"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
-------------------------------------------------------
我的硬件信息：
tux / # lspci
0000:00:00.0 Host bridge: Intel Corporation 82845G/GL/GE/PE DRAM Controller/Host-Hub Interface (rev 03)
0000:00:02.0 VGA compatible controller: Intel Corporation 82845G/GL/GE Chipset Integrated Graphics Device (rev 03)
0000:00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 02)
0000:00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 02)
0000:00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 02)
0000:00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 EHCI Controller (rev 02)
0000:00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 82)
0000:00:1f.0 ISA bridge: Intel Corporation 82801DB/DBL (ICH4/ICH4-L) LPC Interface Bridge (rev 02)
0000:00:1f.1 IDE interface: Intel Corporation 82801DB (ICH4) IDE Controller (rev 02)
0000:00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) SMBus Controller (rev 02)
0000:00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 02)
0000:01:05.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
问题出在哪里？？请教高人指点！！ 用xorgcfg自动配置看看
页:
[1]