gaiwang0142 发表于 2005-9-27 21:40:09

在所SKYEYE上运行linux后出现这样的问题

Freeing init memory: 104K
```SKYEYE ARMul_STC,NOT ALLOW, undefinstr,CPnum is 2, instr eca0420c, addr befffbd0
SKYEYE ARMul_STC,NOT ALLOW, undefinstr,CPnum is 2, instr eca0420c, addr befffa08
SKYEYE ARMul_STC,NOT ALLOW, undefinstr,CPnum is 2, instr eca0420c, addr befffa08
SKYEYE ARMul_STC,NOT ALLOW, undefinstr,CPnum is 2, instr eca0420c, addr befffa08
Welcome to
   _      _____      __   __    _      _
    / \    /__ \    /\_/\| |    |_|
   / _ \   | || |/ /\   /\ \ | |   _ _____   ___
/ /_\ \| |__| | / /\_/\ \| |    | |_ \| | | |\ \/ /
/ /___\ \ | |__\ \ | |       | || |___ | | |_| | |_| |/    \
/_/   \_\| |   \_\|_|       |_||_____||_|_| |_|\____|\_/\_/
SKYEYE ARMul_STC,NOT ALLOW, undefinstr,CPnum is 2, instr eca0420c, addr befffa08
ARMLinux for Skyeye
SKYEYE ARMul_STC,NOT ALLOW, undefinstr,CPnum is 2, instr eca0420c, addr befffa08
SKYEYE ARMul_STC,NOT ALLOW, undefinstr,CPnum is 2, instr eca0420c, addr befffa00
SKYEYE ARMul_LDC,NOT ALLOW, underinstr, CPnum is 2, instr ecbc420c, addr befffa00
SKYEYE ARMul_LDC,NOT ALLOW, underinstr, CPnum is 2, instr ecbc420c, addr befffbd0
SKYEYE ARMul_STC,NOT ALLOW, undefinstr,CPnum is 2, instr eca0420c, addr befffabc
`
Please press Enter to activate this console.
SKYEYE ARMul_STC,NOT ALLOW, undefinstr,CPnum is 2, instr eca0420c, addr befffbf0


BusyBox v1.00 (2005.09.25-07:53+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

SKYEYE ARMul_STC,NOT ALLOW, undefinstr,CPnum is 2, instr eca0420c, addr beffe938
SKYEYE ARMul_STC,NOT ALLOW, undefinstr,CPnum is 2, instr eca0420c, addr beffe7f4
SKYEYE ARMul_LDC,NOT ALLOW, underinstr, CPnum is 2, instr ecbc420c, addr beffe7f4
SKYEYE ARMul_LDC,NOT ALLOW, underinstr, CPnum is 2, instr ecbc420c, addr beffe938
SKYEYE ARMul_STC,NOT ALLOW, undefinstr,CPnum is 2, instr eca0420c, addr beffe938
SKYEYE ARMul_STC,NOT ALLOW, undefinstr,CPnum is 2, instr eca0420c, addr beffe7f4
SKYEYE ARMul_LDC,NOT ALLOW, underinstr, CPnum is 2, instr ecbc420c, addr beffe7f4
SKYEYE ARMul_LDC,NOT ALLOW, underinstr, CPnum is 2, instr ecbc420c, addr beffe938
/ #

gaiwang0142 发表于 2005-9-28 22:00:54

问题解决了
是 skyeye-1.0.0对PXA指令的支持不好
换到最新的skyeye-1.1.8后就没有 这些问题了
页: [1]
查看完整版本: 在所SKYEYE上运行linux后出现这样的问题