nv 驱动安装成功，可是每次进入都比较麻烦
我是一个超级新的新手，能把NVGF2的驱动装上已经很感动了。每次进入redhat时都可以选择“会话”然后输入用户名密码进入。
可是问题是第一次启动的这个xwindows并没有nv的驱动。很奇怪，游戏都不能玩。
然后在“终端命令行中”输入“init 3”关闭xwindows，然后在控制台输入用户名和密码，再输入“startx"这个时候就能看到NV的标志图片，而且直接进入到桌面，这个时候游戏也可以玩。
有没有办法让它每次启动就直接驱动NV呢？
还有，怎么做才能让我的redhat不进入xwindows，而是直接在控制台。
大家记住，我是一个超级的新手，希望你们能回答我的问题，谢谢麻烦步骤上说清楚点噢。。。。
谢谢~~~~~ (.)_(.) 我除了用的发行版本和楼主不一样之外，所遇到的情况一模一样。我是红旗5.0，只有用startx才能挂上驱动，即使挂上驱动，刷新率也有点问题，我都调到120了，可是屏幕还是闪（我的显示器其实只支持到85）.另外，我用Xconfigurator命令看到了我的显卡（6200A，可是他还是把nv设成默认，这样到底算不算挂上驱动了，我的控制面板里面也没有发现nvidia的控制选项。 修改/etc/X11/xorg.conf或/etc/X11/xf86config没有？ /etc/X11/xf86config
在装完驱动后按说明修改了。
原先没有装驱动之前，点击我的小红帽->注销，选择注销，仍还是在xwindows的界面输入用户名和密码。
但是装完驱动之后，注销完就到了控制台，没办法像原先那样子修改要用KDE还是G什么的那个会话。
只有第一次启动才是原先的xwindows，没有nv标志的那个，这时init 3才有效，注销后仍在xwindows
而使用init 3之后再输入X可以看到nv的标志，但没办法进入的桌面。而输入startx则可以看到nv的标志也可以正常的使用，游戏也很流畅，但是这时输入init 3就无效，只能注销，但注销不像第一次启动那样还在xwindows界面，而是在控制台，只有再次输入startx才能再次进入桌面。
谢谢回答~~ 以下是我的XF86Config
# XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "Default Layout"
Screen 0"Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database.Note, this is the name of the
# file minus the extension (like ".txt" or ".db").There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load"dbe"
Load"extmod"
Load"fbdevhw"
Load"glx"
Load"record"
Load"freetype"
Load"type1"
# Load"dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier"Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier"Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier"DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "未探测过的显示器"
HorizSync 31.5 - 37.9
VertRefresh55.0 - 70.0
Option "dpms"
EndSection
Section "Device"
Identifier"Videocard0"
Driver "nvidia"
VendorName"Videocard vendor"
BoardName "NVIDIA GeForce 2 MX (generic)"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection 把# Load "dri"删了，还有，你的显示器系统没认出来，这可能也是个问题。 神奇，我什么也没有做，只是把mplayer装进去了，结果没想到呀，连NV的这个问题也一同解决了。。。太神奇了，可是我对了新旧两个XF86Config文件，愣是没有找到哪里有什么不同。
在装mplayer的时候，由于没有gtk装了gtk和glib两个 rmp文件。
后来就是./config再后来就是make，结果，哈哈mplayer可以用了，nv也好了。
现在一启动就出现nv的标志，进去后一切正常也游戏也很流。。
我再把现在的XF86Config发一下。
不过之前是什么问题呢？
还有，怎么改让我的redhat开机后不启动Xwindows. # XFree86 4 configuration created by redhat-config-xfree86
Section "ServerLayout"
Identifier "Default Layout"
Screen 0"Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "DevInputMice" "AlwaysCore"
EndSection
Section "Files"
# RgbPath is the location of the RGB database.Note, this is the name of the
# file minus the extension (like ".txt" or ".db").There is normally
# no need to change the default.
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Red Hat 6.0 and later now use a font server independent of
# the X server to render fonts.
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "unix/:7100"
EndSection
Section "Module"
Load"dbe"
Load"extmod"
Load"fbdevhw"
Load"glx"
Load"record"
Load"freetype"
Load"type1"
# Load"dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier"Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier"Mouse0"
Driver "mouse"
Option "Protocol" "PS/2"
Option "Device" "/dev/psaux"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "InputDevice"
# If the normal CorePointer mouse is not a USB mouse then
# this input device can be used in AlwaysCore mode to let you
# also use USB mice at the same time.
Identifier"DevInputMice"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "未探测过的显示器"
HorizSync 31.5 - 37.9
VertRefresh55.0 - 70.0
Option "dpms"
EndSection
Section "Device"
Identifier"Videocard0"
Driver "nvidia"
VendorName"Videocard vendor"
BoardName "NVIDIA GeForce 2 MX (generic)"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection 怎么没人来灌灌。。。 你不是已经解决了吗？ 我还没解决呢！！我也改了文件，装了驱动，必须到命令模式下运行startx才能挂上驱动，基本情况我在二楼说得比较清楚了。 看错人了。再看看你的安装日志。
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "未探测过的显示器"
HorizSync 31.5 - 37.9
VertRefresh55.0 - 70.0
Option "dpms"
EndSection
你这个显示器看上去眼睛不累吗？是什么牌子？什么型号的？ 是一个比较早的NEC 15'显示器，在windows 下可以上75hz，我现在已经改成
HorizSyne 58
VertRefresh 75
可是改了之后效果仍依然.
首先说明一下，这个问题虽然我现在没有了，但并不是我解决的，因为我也不知道怎么回事后就可以了，之间我只是装了一个mplayer。
贴里有两个XF86Config，前一个是有问题时的文件，后一个是解决后的文件。可是我看不出他们有什么不同。然道这个问题和XF86Config无关？ 我也看不出你的两个配置文件有什么不同
页:
[1]