怎样在skyeye下面跑samsung的4510网络?
我现在做到这一步:模拟uclinux可以看到eth0,但是和10.0.0.1ping不通,主机和110.0.0.1可以ping通,下面是具体的提示信息,好像是模拟网卡8019没有得到skeye的回应?# skyeye linux
***********************************************************************
**** ****
**** SkyEyeSimulator Ver 0.9.8 withGDB/Insight 5.3 Interface ****
**** ****
***********************************************************************
GNU gdb 5.3
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.Type "show warranty" for details.
This SkyEye was configured as "--host=i686-pc-linux-gnu --target=arm-elf"...
(SkyEye) tar s
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name s3c4510b, mach_init addr 0x816144c
nic info: state=1, ethmod num=1, mac addr=0:4:3:2:1:f, hostip=10.0.0.1
nic_init_begin
tapif_init begin
tapif_init: fd 6
tapif_init: system("ifconfig tap0 inet 10.0.0.1");
tapif_init end
nic_init_end
SKYEYE: use arm7100 mmu ops
Loaded ROM ../images/romfs.img
Connected to the simulator.
(SkyEye) load
Loading section .init, size 0xa000 vma 0x8000
Loading section .text, size 0x1a6fc8 vma 0x12000
Loading section .data, size 0x7d44 vma 0x1ba000
Start address 0x8000
Transfer rate: 14444640 bits in <1 sec.
(SkyEye) run
Starting program: /l/uclinux/20040408/uClinux-dist/test_samsung/linux
Linux version 2.4.24-uc0 (root@linux2) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #12 ??
页:
[1]