HELP 急!Xp 安装 REDHAT 9.0 后.无法进
XP本来分为C,D,E,F四个区,XP安装在C. 然后在XP中用PartitionMagic8.0在F盘中划分出3.7G用来装REDHAT的根分区,256 用做SWAP.安装完成后,可进入REDHAT.但在GRUB界面中选DOS,.出现XP启动界面.没多久就自动重启.请各位大哥帮忙.我在这里等这 多谢!这是fdisk -l m后.显示的信息
Disk /dev/hdd: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks IdSystem
/dev/hdd1 1 638 5124703+1bHidden Win95 FAT32
/dev/hdd2 639 435529856802+ fWin95 Ext'd (LBA)
/dev/hdd3 * 4356 4832 3831502+83Linux
/dev/hdd4 4833 4865 265072+82Linux swap
/dev/hdd5 639 190710193211 bWin95 FAT32
/dev/hdd6 1908 317610193211 7HPFS/NTFS
/dev/hdd7 3177 4355 9470286 bWin95 FAT32
这是 grbu.conf 里面的信息
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
# NOTICE:You do not have a /boot partition.This means that
# all kernel and initrd paths are relative to /, eg.
# root (hd0,2)
# kernel /boot/vmlinuz-version ro root=/dev/hdd3
# initrd /boot/initrd-version.img
#boot=/dev/hdd
default=1
timeout=10
splashimage=(hd0,2)/boot/grub/splash.xpm.gz
title Red Hat Linux (2.4.20-8)
root (hd0,2)
kernel /boot/vmlinuz-2.4.20-8 ro root=LABEL=/
initrd /boot/initrd-2.4.20-8.img
title DOS
rootnoverify (hd0,0)
chainloader +1
/dev/hdd1 1 638 5124703+ 1b Hidden Win95 FAT32
你的第一分区是隐藏的。为什么？ 你好我也不知道在怎 么会是隐藏的装的过程哪些地方选错了? 基本上没动就是一直点下去的啊 你好我也不知道在怎 么会是隐藏的装的过程哪些地方选错了? 基本上没动就是一直点下去的啊 你可以在 linux 用fdisk 或cfdisk修改一下hdd1的分区id。具体man一下 Device Boot Start End Blocks IdSystem
/dev/hdd1 1 638 5124703+1bHidden Win95 FAT32
/dev/hdd2 639 435529856802+ fWin95 Ext'd (LBA)
/dev/hdd3 * 4356 4832 3831502+83Linux
/dev/hdd4 4833 4865 265072+82Linux swap
/dev/hdd5 639 190710193211 bWin95 FAT32
/dev/hdd6 1908 317610193211 7HPFS/NTFS
/dev/hdd7 3177 4355 9470286 bWin95 FAT32
版主大哥,你还在?我觉得是我安装我把boot给了LINUX,现在hdd3是BOOT.结果导致现在WINDOWS的C 变成Hidden
我看边上的兄弟的.主分区是hdd1,c盘就不是Hidden的
请问怎么解决
我在fdisk中没发现怎么解决?
OPTIONS
-b sectorsize
Specify the sector size of the disk. Valid values are 512, 1024,
or 2048.(Recent kernels know the sector size. Use this only on
old kernels or to override the kernel's ideas.)
-C cyls
Specify the number of cylinders of the disk.I have no idea why
anybody would want to do so.
-H heads
Specifythe number of heads of the disk. (Not the physical num-
ber, of course, but the number used for partition tables.)Rea-
sonable values are 255 and 16.
-S sects
physical number, of course, but the numberusedforpartition
tables.)A reasonable value is 63.
-l Listthepartitiontablesfor the specified devices and then
exit.If no devices are given, those mentioned in/proc/parti-
tions (if that exists) are used.
-u Whenlisting partition tables, give sizes in sectors instead of
cylinders.
-s partition
The size of the partition (in blocks) is printed on the standard
output.
-v Print version number of fdisk program and exit.
页:
[1]