xuehua 发表于 2003-3-6 15:55:26

在windows下能看Linux的文本吗？

在windows下能看Linux的文本吗？

超级用户 发表于 2003-3-6 17:42:53

能
在linux下做些转换；

或者用功能强些的文字处理软件

llc 发表于 2003-3-6 17:54:41

无需转换，linux下的文本文件，用写字板打开就行了，不要用记事本

atom113 发表于 2003-3-13 11:45:44

但是文本编辑器有时会对于控制符的处理有差异 :roll:

pjc5520 发表于 2003-3-15 23:08:45

在linux下生成的文本文件再windows下看有点困难。可能是控制符的问题。我用word转换了一下才好。

Dragonfly 发表于 2003-3-16 06:07:18

Re: 在windows下能看Linux的文本吗？

在windows下能看Linux的文本吗？

this problem comes from different line control flags under windows and linux(unix). windows uses 0a0d while unix only uses 0a. so that is why when u open windows text under linux with old version vi, it will show ^M at line end and that is why your linux text shows no line under windows notpad.

suggest to use ultraedit under windows. it will prompt u to do unix->dos conversion. and even u donot convert it, it display correctly.

HalfWorm 发表于 2003-3-17 02:21:34

用UltraEdit

jackzheng2002 发表于 2003-3-19 12:45:20

可是我的windows下根本看不到linux的盘啊
怎么解决呢

Dragonfly 发表于 2003-3-19 22:52:19

u have two solution. either one is ok.
1) install an ext2 disk tool to view ext2 partition under windows. of course you need partition u /usr as ext2 or ext3.
2) get a copy of linux-2.x.x.tgz from www.kernel.org, uncompress it under windows partition using winzip.

jackzheng2002 发表于 2003-3-20 11:50:50

u have two solution. either one is ok.
1) install an ext2 disk tool to view ext2 partition under windows. of course you need partition u /usr as ext2 or ext3.
2) get a copy of linux-2.x.x.tgz from www.kernel.org, uncompress it under windows partition using winzip.
thank you
i will try
页: [1]
查看完整版本: 在windows下能看Linux的文本吗？