有关UBOOT的问题
# /zysoft/skyeye-1.0.0/binary/skyeye------------------------- SkyEye -V1.0 ---------------------------
Usage: SkyEye program
Default mode is STANDALONE mode
------------------------------------------------------------------
Options:
-e exec-file the (ELF executable format)kernel file name.
-d in GDB Server mode (can be connected by GDB).
-c config-file the skyeye configure file name.
-h This Help Display
------------------------------------------------------------------
debugmode= 0, filename = (null), server TCP port is 12345
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
Error: Unkonw mach name "s3c24x0"
"mach" option parameter error!
段错误
请问这个问题怎么解决?在UBOOT中对机器的定义到底要有哪些?SKYEYE中要对机器再定义吗? skyeye.conf的问题，与u-boot无关。
请贴出你的skyeye.conf
现在出现的问题是这样的,请大侠帮帮我!!!!!
uboot是1.1.3V, board是 at91rm9200dk***********************************************************************
GNU gdb 5.3
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.Type "show warranty" for details.
This SkyEye was configured as "--host=i686-pc-linux-gnu --target=arm-elf".
(SkyEye) tar s
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
mach info: name at91rm92, mach_init addr 0x81657d4
dbct info: turn on dbct!
SKYEYE: use arm920t mmu ops
Loaded RAM ./u-boot.bin
dbct translate block use memory 0x03ffee56 bytes.
Connected to the simulator.
(SkyEye) lo
No executable file specified.
Use the "file" or "exec-file" command.
(SkyEye) run
Starting program:
warning: No executable file specified.
warning: No program loaded.
skyeye.conf是
cpu:arm920t
mach: at91rm92
mem_bank: map=M, type=RW, addr=0x10000000, size=0x00200000, file=./u-boot.bin , boot=yes
mem_bank: map=M, type=RW, addr=0x20000000, size=0x02000000
mem_bank: map=I, type=RW, addr=0xfffa0000, size=0x00060000
谁可以指掂我呀?
页:
[1]