skyeye模拟xscale出错了， 求助
＃skyeye------------------------- SkyEye -V1.0 ---------------------------
Usage: SkyEye program
Default mode is STANDALONE mode
------------------------------------------------------------------
Options:
-e exec-file the (ELF executable format)kernel file name.
-d in GDB Server mode (can be connected by GDB).
-c config-file the skyeye configure file name.
-h This Help Display
------------------------------------------------------------------
debugmode= 0, filename = (null), server TCP port is 12345
cpu info: xscale, pxa25x, 69052100, fffffff0, 2
mach info: name pxa_lubbock, mach_init addr 0x8096108
SKYEYE: use xscale mmu ops
Loaded RAM zImage
Loaded RAM ./initrd
Uncompressing Linux................................................... done, booting the kernel.
Linux version 2.6.7-bk6 (root@linzchang) (gcc version 3.4.3 (released by zlx, email:[email protected])) #8 Sun Nov 20 02:18:18 CST 2005
CPU: XScale-PXA250 revision 0 (ARMv5TE)
CPU: D undefined 5 cache
CPU: I cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
CPU: D cache: 32768 bytes, associativity 32, 32 byte lines, 32 sets
Machine: Intel DBPXA250 Development Platform (aka Lubbock)
Memory policy: ECC disabled, Data cache writeback
Memory clock: 99.53MHz (*27)
Run Mode clock: 99.53MHz (*1)
Turbo Mode clock: 99.53MHz (*1.0, inactive)
On node 0 totalpages: 16384
DMA zone: 16384 pages, LIFO batch:4
Normal zone: 0 pages, LIFO batch:1
HighMem zone: 0 pages, LIFO batch:1
Built 1 zonelists
Kernel command line: root=/dev/ram initrd=0xa1000000,0x01000000 console=ttyS0,115200 mem=64M
Adeos 2.6arm-PXA255: Root domain Linux registered.
Adeos: Pipelining started.
PID hash table entries: 512 (order 9: 4096 bytes)
Console: colour dummy device 80x30
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 64MB = 64MB total
Memory: 46800KB available (1202K code, 344K data, 56K init)
Calibrating delay loop... 187.59 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: Testing write buffer coherency: ok
checking if image is initramfs...it isn't (ungzip failed); looks like an initrd
Freeing initrd memory: 16384K
Linux NoNET1.0 for Linux 2.6
sa11110: failed to claim resource 0
smc91x0: failed to claim resource 0
pxamci0: failed to claim resource 0
pxa2xx_udc0: failed to claim resource 0
pxafb0: failed to claim resource 0
Linux Kernel Card Services
options:
NetWinder Floating Point Emulator V0.97 (double precision)
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
ttyS0 at MMIO 0x40100000 (irq = 15) is a FFUART
ttyS1 at MMIO 0x40200000 (irq = 14) is a BTUART
ttyS2 at MMIO 0x40700000 (irq = 13) is a STUART
RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize
Using anticipatory io scheduler
Lubbock configured to boot from ROM (bank 0)
Probing Lubbock Boot ROM at physical address 0x00000000 (32-bit buswidth)
CFI: Found no Lubbock Boot ROM device at location zero
Probing Lubbock Application Flash at physical address 0x04000000 (32-bit buswidth)
CFI: Found no Lubbock Application Flash device at location zero
pxa2xx_udc: version 14-Dec-2003
gs_module_init: cannot register gadget driver, ret=-19
mice: PS/2 mouse device common for all mice
Adeos: Pipelining started.
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 2048 blocks into ram disk... |（停在这不动了）
页:
[1]