随便问问，关于linux下使用摄像头～～～
大家有没有人解决ML2.0rc或者其他linux下使用中微星301p摄像头的问题阿？公社上有个帖子是关于中微星的驱动下载的，但是我是教育网。下载不了，谁下载了，给个源码包阿～～
我从别的网站下载了个301的linux驱动，有zc301b.o(支持库文件) zc301b.sh（脚本）camstream（可执行软件）
我看了看。看了看～～不会用～～
唉！！
:( 顺便贴出那个脚本内容
#
# Load the needed modules for the zc301 driver.
#
# you may need these commented out lines if your insmod is too old.
#IS24=`uname -r | grep -c ^2.2`
#
#if [ $IS24 == "1" ]
#then
#insmod /lib/modules/2.2.14/misc/videodev.o
#else
#insmod /lib/modules/2.4.0-test10/kernel/drivers/media/video/videodev.o
#fi
#
# Load the modules.
#
# Video4Linux Support
/sbin/insmod videodev
# USB Core Module
/sbin/insmod usbcore
# USB UHCI/OHCI Controller Modules (new)
/sbin/insmod usb-uhci
#/sbin/insmod usb-ohci
# USB UHCI Controller Modules (old)
#/sbin/insmod uhci
# that for the sys request key, comment it out if the quickcam works well.
# if you get any erors: use Alt + SysRq + S = Emergency Sync (write everything on HDD)
# use Alt + SysRq + U = Unmount all HDD's
# use Alt + SysRq + B = Reboot system immediatly
echo "1" > /proc/sys/kernel/sysrq
# zc301.o is in current directory, after copying in /lib/modules/.../usb,
# use insmod zc302.
/sbin/insmod ./zc31b.o
/sbin/lsmod 用kde提供的2.6.13.4配套的摄像头驱动可以驱动一般的摄像头。 :-)
愿闻其详～～～ RC1自带的spca5xx驱动是可以驱动301p的摄像头的。 我的杂牌摄像头都驱动了 大家详细一点阿～～
怎么做，，用什么软件，怎么驱动？ 直接执行命令 spcaview或spcagui,rc1本身就捆绑了驱动 $ spcaview
Spcaview version: 1.1.1 date: 01:10:2005 (C) [email protected]
Initializing SDL.
SDL initialized.
bpp 3 format 15
Using video device /dev/video0.
Initializing v4l.
ERROR opening V4L interface
: No such file or directory
$ spcagui
SpcaGui version: 0.3.5 date: 18 September 2005
video device /dev/video0
ERROR opening V4L interface
: No such file or directory
都不行阿～～
我的usb摄像头已经插好了 试试
MAKEDEV -v video0
创建设备，然后再运行spcaview
这个问题我在1.2F上也遇到过。 我用root运行了MAKEDEV －video0
再用普通用户运行spacview显示
Spcaview version: 1.1.1 date: 01:10:2005 (C) [email protected]
Initializing SDL.
SDL initialized.
bpp 3 format 15
Using video device /dev/video0.
Initializing v4l.
ERROR opening V4L interface
: Permission denied
用root运行spcaview
Spcaview version: 1.1.1 date: 01:10:2005 (C) [email protected]
Initializing SDL.
SDL initialized.
bpp 3 format 15
Using video device /dev/video0.
Initializing v4l.
ERROR opening V4L interface
: No such device
还是不行，我已经创建了video0设备了阿。。。。。这么奇怪。
:-( 和你一个问题，纳闷中 就目前而言，连我本人的老摄像头都不能驱动。spca5xx 驱动 11月5日 版目前支持 176 种芯片，仅中星公司就有一批芯片尚未在支持之列。除非厂商开放技术标准，否则很难全部兼容。 看来没戏了～～呵呵。。。
:cry: 怎么关闭图象呀??我的信息如下:
$ spcagui
SpcaGui version: 0.3.5 date: 18 September 2005
video device /dev/video0
$spcaview
Spcaview version: 1.1.1 date: 01:10:2005 (C) [email protected]
Initializing SDL.
SDL initialized.
bpp 3 format 15
Using video device /dev/video0.
Initializing v4l.
**************** PROBING CAMERA *********************
Camera found: Z-star Vimicro zc0301p
Bridge found: ZC301-2
Bridge find ZC301-2 number 13
StreamId: JPEG Camera
Bridge find ZC301-2 number 13
Available Resolutions width 640heigth 480 native
Available Resolutions width 352heigth 288 decoded
Available Resolutions width 320heigth 240 native *
Available Resolutions width 176heigth 144 decoded
*****************************************************
grabbing method default MMAP asked
VIDIOCGMBUF size 4915232frames 4offets=0 offsets=1228808
VIDIOCGPICT
brightnes=32768 hue=0 color=0 contrast=32768 whiteness=0
depth=12 palette=15
VIDIOCSPICT
brightness=32768 hue=0 color=0 contrast=32768 whiteness=0
depth=24 palette=15
cvsync err
: Interrupted system call
VIDIOCSPICT
brightness=32768 hue=0 color=65024 contrast=32768 whiteness=0
depth=24 palette=15
Used 21933ms for 158 images => 138ms/image 7fps.
Quiting SDL.
Decoded frames:158 Average decode time: 10.000000
unmapping
我按下ctrl-c
closing
closed
Destroy Picture thread ...
Quiting....
页:
[1]
2