请问skyeye-1.2.0-RC4对mainstone的支
请问skyeye-1.2.0-RC4对mainstone的支持成熟了吗?问题表现如下
zImage为制作zImage是objcopy之前的elf文件skyeye.conf为:
cpu: pxa27x
mach: pxa_mainstone
mem_bank: map=I, type=RW, addr=0x40000000, size=0x0c000000
mem_bank: map=M, type=RW, addr=0xa0000000, size=0x00200000
mem_bank: map=M, type=RW, addr=0xa0200000, size=0x00100000
mem_bank: map=M, type=RW, addr=0xa0300000, size=0x00d00000
mem_bank: map=M, type=RW, addr=0xa1000000, size=0x00800000, file=./initrd4M.img
mem_bank: map=M, type=RW, addr=0xa1800000, size=0x02800000
执行命令,到下面状态停滞
$ skyeye-e zImage
------------------------- SkyEye -V1.2 ---------------------------
Usage: SkyEye program
Default mode is STANDALONE mode
------------------------------------------------------------------
Options:
-e exec-file the (ELF executable format)kernel file name.
-d in GDB Server mode (can be connected by GDB).
-c config-file the skyeye configure file name.
-h This Help Display
-v This shows arch and cpu supported
------------------------------------------------------------------
debugmode= 0, filename = (null), server TCP port is 12345
arch: arm
cpu info: xscale, pxa27x, 69054110, fffffff0, 2
mach info: name pxa_mainstone, mach_init addr 0x8077460
SKYEYE: use xscale mmu ops
Loaded RAM ./initrd4M.img
exec file "zImage"'s format is elf32-little.
load section .text: addr = 0x00000000size = 0x000f14e0.
load section .got: addr = 0x000f14e0size = 0x00000064.
load section .got.plt: addr = 0x000f1544size = 0x0000000c.
load section .data: addr = 0x000f1550size = 0x00000000.
not load section .bss: addr = 0x000f1560size = 0x00008444 .
not load section .stack: addr = 0x000f99a4size = 0x00001000 .
not load section .comment: addr = 0x00000000size = 0x00000012 .
not load section .debug_line: addr = 0x00000000size = 0x00000ee1 .
not load section .debug_info: addr = 0x00000000size = 0x0000ecd5 .
not load section .debug_abbrev: addr = 0x00000000size = 0x00000495 .
not load section .debug_aranges: addr = 0x00000000size = 0x00000068 .
not load section .debug_frame: addr = 0x00000000size = 0x00000288 .
not load section .debug_pubnames: addr = 0x00000000size = 0x0000004e .
not load section .debug_ranges: addr = 0x00000000size = 0x00000018 .
not load section .debug_str: addr = 0x00000000size = 0x00006eed .
start addr is set to 0x00000000 by exec file. It seems your sdram start address should be0xa0000000, But the start address your zimage's text segmentis 0x00000000. Is there some problem? 我可以把entry设置成0xa0000000，但是结果差不多
我不清楚为什么运行到那儿就不动了，也没有错误提示。
我还下载了intel-pxa27x-testsuit，但是结果也差不多，到那儿就不动了 为什么skyeye1.2没有交互调试界面了？ 另外我编译pxa27x内核用加armlinux4skyeye-v0.2.3.tar.gz补丁吗？
页:
[1]