[新手]S3 UniChromeIGP驱动无法安装
我的板子是p4M800CE的，集成S3 UniChromeIGP显示芯片，安装ML2.0Final后显示不正常，表现为刷新率为60，分辨率800x600，无法更改（显示器SyncMaster 788DF），更改Xorg.conf也不行，并且xvidtune命令无效（好像不支持我的显卡模块）。想通过安装驱动解决，但是安装说明：
---------------------------------------------------------------------------
Building and loading viafb device driver for Linux kernel 2.6
---------------------------------------------------------------------------
Building fbcon console module.
Step 1: Change to folder /usr/src/linux-2.6.
# cd /usr/src/linux-2.6.
The linux-2.6 directory depend on your kernel version, so if your kernel version is
2.6.5-1.358, you should type "/usr/src/linux-2.6.5-1.358".
Step 2: Configuring the kernel module
# make menuconfig
Step 3: Select fbcon item to module.
-> Device Drivers->Graphics support->Console display driver support->
<M> Framebuffer Console support
Step 4: Save the current setting and quit.
Step 5: Make fbcon module.
# make modules
Note that if no any error, this step will be produced "fbcon.ko" in
/usr/src/linux-2.6./drivers/video/console folder.
Step 6: Copy fbcon.ko to lib folder.
# cp /usr/src/linux-2.6./drivers/video/console/fbcon.ko\
/lib/modules/2.6./kernel/drivers/video
我却找不到/usr/src下面的linux-2.6.xx这个目录
听说好像要编译内核才行？具体怎么弄？
顺便说一下，我的xorg.conf显示设置更改成如下内容，kde已经进不去了，反复在kde的启动画面上重启。
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor 1024x768"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 71.5
VertRefresh50.0 - 86.5
EndSection
Section "Device"
Identifier"Videocard0"
Driver "vesa"
VendorName"Videocard vendor"
BoardName "VESA driver (generic)"
VideoRam 65536
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600"
EndSubSection
EndSection
页:
[1]