笔记本上用ML,网卡的问题，请教……
重装了系统之后发现网卡不能enable，主板是sis730，网卡是sis900上sis的网站上下了驱动，for linux的，解压之后三个文件，readme , sis900.c , sis900.h
readme的内容如下：
"make modules" fails on Redhat 8.0.It is kernel 2.4.18-14 , and it need driver 1.08.06.
You can individually compile the sis900.o with below procedures:
a.Symbolic Links "asm" and "linux" to "/usr/src/linux-2.4.18-14/include/."
a.1.Go to /usr/include directory
a.2.mv asm asm_ ( or rm asm)
a.3.mv linux linux_ (or rm linux)
a.4.ln -s /usr/src/linux-2.4.18-14/include/asm asm
a.5.ln -s /usr/src/linux-2.4.18-14/include/linux linux
b.Create new directory and copy sis900.c and sis900.o into them.
b.1 mkdir tmp
b.2 cp -f sis900.c /tmp/sis900.c
b.3 cp -f sis900.h /tmp/sis900.h
b.4 cd /tmp
b.5 gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -o6 -c -sis900.c
c.Copy and replace sis900.o into "/lib/modules/2.4.18-14/kernel/drivers/net/."
c.1 cp -f sis900.o /lib/modules/2.4.18-14/kernel/drivers/net/sis900.o
这个应该是在红毛8上用的吧？在ML2上偶不会装……路径不一样，还有b ，c不知道从哪里又跑出来一个sis900.o，彻底晕菜了……
CJ菜鸟提问，请指教一下，谢谢！ 用在ml上应该没事吧，大部分发行版的目录结构基本相似。
sis900.o应该是你自己编译出来的模块？！ 也不知道怎么就好了，晕晕的还是…… KDE崩溃一次
(no debugging symbols found)
Using host libthread_db library "/lib/tls/libthread_db.so.1".
(no debugging symbols found)
`shared object read from target memory' has disappeared; keeping its symbols.
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread -1231328544 (LWP 2885)]
[KCrash handler]
#40xb7defa89 in KFileItem::isDir () from /usr/lib/libkio.so.4
#50xb57cf5f2 in SpringLoadingManager::springLoadTrigger ()
from /usr/lib/kde3/konq_iconview.so
#60xb57d2d4e in KonqKfmIconView::slotDragHeld ()
from /usr/lib/kde3/konq_iconview.so
#70xb57d4317 in KonqKfmIconView::qt_invoke ()
from /usr/lib/kde3/konq_iconview.so
#80xb7162604 in QObject::activate_signal ()
from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#90xb7b0f5a0 in KIconView::held () from /usr/lib/libkdeui.so.4
#10 0xb7b0f601 in KIconView::slotDragHoldTimeout ()
from /usr/lib/libkdeui.so.4
#11 0xb7b0fb20 in KIconView::qt_invoke () from /usr/lib/libkdeui.so.4
#12 0xb697e6c5 in KonqIconViewWidget::qt_invoke () from /usr/lib/libkonq.so.4
#13 0xb7162604 in QObject::activate_signal ()
from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#14 0xb7162d9d in QObject::activate_signal ()
from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#15 0xb74c18c9 in QTimer::timeout () from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#16 0xb71847cf in QTimer::event () from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#17 0xb70fe0bf in QApplication::internalNotify ()
from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#18 0xb70fe2c2 in QApplication::notify ()
from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#19 0xb7763ac5 in KApplication::notify () from /usr/lib/libkdecore.so.4
#20 0xb70f16ec in QEventLoop::activateTimers ()
from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#21 0xb70a8648 in QEventLoop::processEvents ()
from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#22 0xb71148d1 in QEventLoop::enterLoop ()
from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#23 0xb7114826 in QEventLoop::exec () from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#24 0xb70fd21f in QApplication::exec () from /usr/lib/qt-3.3/lib/libqt-mt.so.3
#25 0xb65339bc in kdemain () from /usr/lib/libkdeinit_konqueror.so
#26 0xb7f9f734 in kdeinitmain () from /usr/lib/kde3/konqueror.so
#27 0x0804e285 in ?? ()
#28 0x00000002 in ?? ()
#29 0x0808c7c0 in ?? ()
#30 0x00000001 in ?? ()
#31 0x00000000 in ?? ()
b.5 gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -o6 -c -sis900.c
c.Copy and replace sis900.o into "/lib/modules/2.4.18-14/kernel/drivers/net/."
c.1 cp -f sis900.o /lib/modules/2.4.18-14/kernel/drivers/net/sis900.o
不用管前面的，按这几步就行了，如果有错误就贴上来，不过怕是肯定有错误，看起来是针对2.4内核，sis900应该可以认才对。 问题已经解决，可以上网了……
怎么感觉装的ML2巨慢？还没有2K快？是我的配置太低……我本本的配置是C Tulatin 1.2G,384 sd133,swap 512M。大家的速度如何？
有没有比较好的可以兼容xls格式的表格处理软件推荐？WPS2005试装了以后用起来很慢，而且大部分文件都打不开。基于wine的东东，在linux里不怎么好用…………
页:
[1]