[求助]模拟uboot时,出现"不可识别的文件格式"错误
如题,小弟按照论坛里faif大侠的方法模拟uboot的运行,所有文件版本(skyeye,uboot,eldk)均一样,编译也顺利通过,就是在运行时出现如下错误,还请各位高手帮忙指点一二,不胜感激!# skyeye
***********************************************************************
**** ****
**** SkyEyeSimulator Ver 0.8.5 withGDB/Insight 5.3 Interface ****
**** ****
***********************************************************************
GNU gdb 5.3
Copyright 2002 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are
welcome to change it and/or distribute copies of it under certain conditions.
Type "show copying" to see the conditions.
There is absolutely no warranty for GDB.Type "show warranty" for details.
This SkyEye was configured as "--host=i686-pc-linux-gnu --target=arm-elf".
(SkyEye) tar s
cpu info: armv4, arm720t, 41807200, ffffff00, 1
mach info: name ep7312, mach_init addr 0x8163360
SKYEYE: use arm7100 mmu ops
Loaded RAM ./u-boot.bin
Connected to the simulator.
(SkyEye) load u-boot.bin
gdbsim: "u-boot.bin" is not an object file: 不可识别的文件格式
unable to load program
页:
[1]