征集笔记本上的xorg配置文件
在笔记本上跑xorg算是最麻烦的了。一般的功能还可以,
可是Fn+...调整亮度
配置刷新率一类的细节就让人摸不到头脑。
请弟兄们共享自己的xorg.conf
尤其是XKb的相关内容,让Xorg在大家的本子上跑的更好。 GMA900(910GM):
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0"Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/TTF"
FontPath "/usr/share/fonts/default/Type1"
FontPath "/usr/share/fonts/ttf/zh_CN"
EndSection
Section "Module"
Load"dbe"
Load"extmod"
Load"fbdevhw"
Load"glx"
Load"GLcore"
Load"record"
Load"freetype"
Load"type1"
Load"dri"
EndSection
Section "InputDevice"
Identifier"Keyboard0"
Driver "kbd"
Option "XbkModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
# Modified by system-config-mouse
Identifier"Mouse0"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1024x768"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 48.5
VertRefresh40.0 - 70.0
EndSection
Section "Device"
Identifier"Videocard0"
Driver "i810"
VendorName"Videocard vendor"
BoardName "Intel GMA900"
VideoRam 32768
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
神舟承运B370R,倒是蓝牙棒和读卡器不知怎么用:(郁闷... Acer Aspire3020
ATI Radeon Mobility X600
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0"Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/TTF"
FontPath "/usr/share/fonts/default/Type1"
FontPath "/usr/share/fonts/ttf/zh_CN"
EndSection
Section "Module"
Load"dbe"
Load"extmod"
Load"fbdevhw"
Load"glx"
Load"record"
Load"freetype"
Load"type1"
Load"dri"
EndSection
Section "InputDevice"
Identifier"Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XbkModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier"Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "no"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Digital 17 in. Color (FR-PCXBV-KA)"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 66.0
VertRefresh50.0 - 130.0
EndSection
Section "Device"
Identifier"Videocard0"
Driver "radeon"
VendorName"Videocard vendor"
BoardName "ATI Radeon Mobility X600"
VideoRam 65536
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
PS:显示器是那个我是在WIN下看的……所以选了一个厂商的,也可以用,还好没有超出频率 ACER FERRARI 4005
SUSE 10.1 + xgl
# /.../
# SaX generated X11 config file
# Created on: 2006-05-13T15:00:12+0800.
#
# Version: 7.1
# Contact: Marcus Schaefer <[email protected]>, 2005
# Contact: SaX-User list <https://lists.berlios.de/mailman/listinfo/sax-users>
#
# Automatically generated by [SaX2] (7.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
InputDevices "/dev/gpmdata"
InputDevices "/dev/input/mice"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/opt/kde3/share/fonts"
FontPath "/usr/local/share/fonts"
EndSection
Section "Module"
Load "dbe"
Load "type1"
Load "freetype"
Load "extmod"
Load "glx"
Load "v4l"
Load "dri"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "on"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard[0]"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse[1]"
Option "Buttons" "10"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech USB-PS/2 Optical Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse[3]"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "InputFashion" "Mouse"
Option "Name" "Synaptics;Touchpad"
Option "Protocol" "explorerps/2"
Option "SHMConfig" "on"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Option "CalcAlgorithm" "XServerPool"
DisplaySize330 210
HorizSync 31-60
Identifier "Monitor[0]"
ModelName "SEC 1024"
Option "DPMS"
VendorName "SAMSUNG"
VertRefresh30-60
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
EndSection
Section "Device"
BoardName "Mobility Radeon X700 5653 (M26) (PCIE)"
BusID "1:0:0"
Driver "fglrx"
Identifier "Device[0]"
Option "MonitorLayout" "LVDS,AUTO"
#Option "NoDDC"
Option "UseInternalAGPGART" "no"
Option "no_accel" "no"
Option "no_dri" "no"
Option "mtrr" "off"
Option "ScreenOverlap" "0"
Option "GammaCorrectionI" "0x00000000"
Option "GammaCorrectionII" "0x00000000"
Option "Capabilities" "0x00000000"
Option "CapabilitiesEx" "0x00000000"
Option "VideoOverlay" "on"
Option "OpenGLOverlay" "off"
Option "CenterMode" "off"
Option "PseudoColorVisuals" "off"
Option "Stereo" "off"
Option "StereoSyncEnable" "1"
Option "FSAAEnable" "no"
Option "FSAAScale" "1"
Option "FSAADisableGamma" "no"
Option "FSAACustomizeMSPos" "no"
Option "FSAAMSPosX0" "0.000000"
Option "FSAAMSPosY0" "0.000000"
Option "FSAAMSPosX1" "0.000000"
Option "FSAAMSPosY1" "0.000000"
Option "FSAAMSPosX2" "0.000000"
Option "FSAAMSPosY2" "0.000000"
Option "FSAAMSPosX3" "0.000000"
Option "FSAAMSPosY3" "0.000000"
Option "FSAAMSPosX4" "0.000000"
Option "FSAAMSPosY4" "0.000000"
Option "FSAAMSPosX5" "0.000000"
Option "FSAAMSPosY5" "0.000000"
Option "UseFastTLS" "0"
Option "BlockSignalsOnLock" "on"
Option "ForceGenericCPU" "no"
Option "KernelModuleParm" "agplock=0"
VendorName "ATI"
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 16
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 24
Modes "1680x1050"
EndSubSection
SubSection "Display"
Depth 8
Modes "1680x1050"
EndSubSection
Device "Device[0]"
Identifier "Screen[0]"
Monitor "Monitor[0]"
EndSection
Section "ServerLayout"
Identifier "Layout[all]"
InputDevice"Keyboard[0]" "CoreKeyboard"
InputDevice"Mouse[1]" "CorePointer"
InputDevice"Mouse[3]" "SendCoreEvents"
Screen "Screen[0]"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Fn快捷键调整屏幕亮度主要是ACPI在控制。
对华硕、IBM、东芝的笔记本,2.6内核里有相应的模块,载入模块后大多数型号的笔记本的相关快捷键就可以正常工作了。
其他品牌/型号的笔记本,可能需要核心的hotkey模块(配合合适的DSDT)。在核心源码包里面有相关的文档:Documentation/acpi-hotkey.txt
反正这方面的工作通过acpi来做要简单的多,至少这三个牌子的笔记本是这样。 好东西啊,我正好在找这些问题的答案呢!感谢 HP DV1306
ubuntu6.06+aiglx
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/fonts/Chinese/wqy-bitmapfont"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
FontPath "unix/:7100"
EndSection
Section "Module"
# Load "GLcore"
# Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "Device"
Identifier "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Driver "i810"
Option "XAANoOffscreenPixmaps"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1280x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1280x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1280x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1280x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1280x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1280x768"
EndSubSection
EndSection
Section "ServerLayout"
Option "AIGLX" "true"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
HP COMPAQ nc/nx 6120
915/GMA900
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Files"
FontPath "/usr/share/X11/fonts/misc"
FontPath "/usr/share/X11/fonts/cyrillic"
FontPath "/usr/share/X11/fonts/100dpi/:unscaled"
FontPath "/usr/share/X11/fonts/75dpi/:unscaled"
FontPath "/usr/share/X11/fonts/Type1"
FontPath "/usr/share/X11/fonts/100dpi"
FontPath "/usr/share/X11/fonts/75dpi"
# path to defoma fonts
FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
EndSection
Section "Module"
Load "i2c"
Load "bitmap"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbRules" "xorg"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "true"
EndSection
Section "InputDevice"
Identifier "Synaptics Touchpad"
Driver "synaptics"
Option "SendCoreEvents" "true"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "stylus"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "stylus"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "eraser"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "eraser"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "InputDevice"
Driver "wacom"
Identifier "cursor"
Option "Device" "/dev/wacom" # Change to
# /dev/input/event
# for USB
Option "Type" "cursor"
Option "ForceDevice" "ISDV4" # Tablet PC ONLY
EndSection
Section "Device"
Identifier "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Driver "i810"
BusID "PCI:0:2:0"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
Option "DPMS"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 1
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen"
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
InputDevice "stylus" "SendCoreEvents"
InputDevice "cursor" "SendCoreEvents"
InputDevice "eraser" "SendCoreEvents"
InputDevice "Synaptics Touchpad"
EndSection
Section "DRI"
Mode 0666
EndSection
请问2楼,你的kernel和X是什么版本?我的X是6.8.2,咱俩显卡一样,同样的xorg.conf在我上面不行。电脑是联想旭日125c的 神舟天运Q420S
mandriva 2006
[root@localhost ~]# cat /etc/X11/xorg.conf
# File generated by XFdrake.
# **********************************************************************
# Refer to the XF86Config man page for details about the format of
# this file.
# **********************************************************************
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, Mandrake 6.0 and later now use a font server independent of
# the X server to render fonts.
FontPath "unix/:-1"
EndSection
Section "ServerFlags"
#DontZap # disable <Crtl><Alt><BS> (server abort)
AllowMouseOpenFail # allows the server to start up even if the mouse does not work
#DontZoom # disable <Crtl><Alt><KP_+>/<KP_-> (resolution switching)
EndSection
Section "Module"
Load "dbe" # Double-Buffering Extension
Load "v4l" # Video for Linux
Load "extmod"
Load "type1"
Load "freetype"
Load "glx" # 3D layer
Load "dri" # direct rendering
EndSection
Section "InputDevice"
Identifier "Keyboard1"
Driver "keyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "en_US"
Option "XkbOptions" "compose:rwin"
EndSection
Section "InputDevice"
Identifier "Mouse1"
Driver "mouse"
Option "Protocol" "ExplorerPS/2"
Option "Device" "/dev/mouse"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "monitor1"
VendorName "Generic"
ModelName "Flat Panel 1280x800"
HorizSync 31.5-90
VertRefresh 60
# TV fullscreen mode or DVD fullscreen output.
# 768x576 @ 79 Hz, 50 kHz hsync
ModeLine "768x576" 50.00768832846 1000 576590595630
# 768x576 @ 100 Hz, 61.6 kHz hsync
ModeLine "768x576" 63.07768800960 1024 576578590616
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_120"181.211280 1376 1520 1760800 801 804 858-HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_100"147.891280 1376 1512 1744800 801 804 848-HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_85"123.381280 1368 1504 1728800 801 804 840-HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_75"107.211280 1360 1496 1712800 801 804 835-HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_60"83.461280 1344 1480 1680800 801 804 828-HSync +Vsync
# modeline generated by gtf(1) [handled by XFdrake]
ModeLine "1280x800_50"68.561280 1336 1472 1664800 801 804 824-HSync +Vsync
EndSection
Section "Device"
Identifier "device1"
VendorName "Intel Corporation"
BoardName "Intel 945"
Driver "i810"
Option "DPMS"
EndSection
Section "Screen"
Identifier "screen1"
Device "device1"
Monitor "monitor1"
DefaultColorDepth 16
Subsection "Display"
Depth 8
Virtual 1280 800
EndSubsection
Subsection "Display"
Depth 15
Virtual 1280 800
EndSubsection
Subsection "Display"
Depth 16
Virtual 1280 800
EndSubsection
Subsection "Display"
Depth 24
Virtual 1280 800
EndSubsection
EndSection
Section "ServerLayout"
Identifier "layout1"
InputDevice "Keyboard1" "CoreKeyboard"
InputDevice "Mouse1" "CorePointer"
Screen "screen1"
EndSection
[root@localhost ~]#
神舟优雅Q310S,MagicLinux 2.0
# XFree86 4 configuration created by MagicInstaller.
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/TTF"
FontPath "/usr/share/fonts/default/Type1"
FontPath "/usr/share/fonts/ttf/zh_CN"
FontPath "/usr/share/fonts"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XbkModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
# Modified by system-config-mouse
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Unknown monitor"
HorizSync 31.5 - 37.9
VertRefresh 50.0 - 70.0
EndSection
Section "Device"
Identifier "Videocard0"
Driver "sis"
VendorName "Videocard vendor"
BoardName "SiS 660/661FX/M661FX/M661MX/741/741GX/M741/760/M760"
VideoRam 16384
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display16"
Depth 16
Modes "1280x800"
EndSubSection
EndSection
我的是dell的630m
这个一直搞不好....郁闷 联想 昭阳 A800
# cat /etc/X11/xorg.conf
# XFree86 4 configuration created by pyxf86config
Section "ServerLayout"
Identifier "Default Layout"
Screen 0"Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Synaptics" "CorePointer"
InputDevice "Mouse0" "AlwaysCore"
EndSection
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
FontPath "unix/:7100"
EndSection
Section "Module"
Load"dbe"
Load"extmod"
Load"fbdevhw"
Load"glx"
Load"record"
Load"freetype"
Load"type1"
Load"synaptics"
Load"dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option"Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option"XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option"XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option"XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option"XkbLayout" "de"
# or:
# Option"XkbLayout" "de"
# Option"XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option"XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option"XkbOptions" "ctrl:nocaps"
#
Identifier"Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier"Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "InputDevice"
Identifier"Synaptics"
Driver "synaptics"
Option "Device" "/dev/input/mice"
Option "Protocol" "auto-dev"
Option "Emulate3Buttons" "yes"
Option "LeftEdge" "120"
Option "RightEdge" "830"
Option "TopEdge" "120"
Option "BottomEdge" "650"
Option "FingerLow" "14"
Option "FingerHigh" "15"
Option "MaxTapMove" "110"
Option "VertScrollDelta" "20"
Option "HorizScrollDelta" "20"
Option "MinSpeed" "0.3"
Option "MaxSpeed" "0.75"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "LCD Panel 1024x768"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 48.5
VertRefresh40.0 - 70.0
Option "dpms"
EndSection
Section "Device"
Identifier"Videocard0"
Driver "nv"
VendorName"Videocard vendor"
BoardName "nVidia Corporation NV17 "
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 16
Modes "800x600" "640x480"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
MT..MT...
我的是dell的630m这个一直搞不好....郁闷
Me Too,Me Too
再加上内核升不上 :lol:
网卡也不能用 # /.../
# SaX generated X11 config file
# Created on: 2006-08-07T13:03:21+0800.
#
# Version: 7.1
# Contact: Marcus Schaefer <[email protected]>, 2002
#
# Automatically generated by (7.1)
# PLEASE DO NOT EDIT THIS FILE!
#
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/local"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/URW"
FontPath "/usr/X11R6/lib/X11/fonts/truetype"
FontPath "/usr/X11R6/lib/X11/fonts/uni:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/CID"
FontPath "/opt/kde3/share/fonts"
FontPath "/usr/local/share/fonts"
InputDevices "/dev/ttyS0"
InputDevices "/dev/ttyS1"
InputDevices "/dev/ttyS2"
InputDevices "/dev/ttyS3"
InputDevices "/dev/ttyS4"
InputDevices "/dev/ttyS5"
InputDevices "/dev/ttyS6"
InputDevices "/dev/ttyS7"
InputDevices "/dev/ttyS8"
InputDevices "/dev/psaux"
InputDevices "/dev/logibm"
InputDevices "/dev/sunmouse"
InputDevices "/dev/atibm"
InputDevices "/dev/amigamouse"
InputDevices "/dev/atarimouse"
InputDevices "/dev/inportbm"
InputDevices "/dev/gpmdata"
InputDevices "/dev/mouse"
InputDevices "/dev/usbmouse"
InputDevices "/dev/adbmouse"
InputDevices "/dev/input/mice"
InputDevices "/dev/input/event0"
InputDevices "/dev/pointer0"
InputDevices "/dev/pointer1"
InputDevices "/dev/pointer2"
InputDevices "/dev/pointer3"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail"
EndSection
Section "Module"
Load "glx"
Load "type1"
Load "extmod"
Load "dbe"
Load "freetype"
Load "v4l"
EndSection
Section "InputDevice"
Driver "kbd"
Identifier "Keyboard"
Option "Protocol" "Standard"
Option "XkbLayout" "us"
Option "XkbModel" "pc104"
Option "XkbRules" "xfree86"
EndSection
Section "InputDevice"
Driver "mouse"
Identifier "Mouse"
Option "Buttons" "5"
Option "Device" "/dev/input/mice"
Option "Name" "Logitech USB-PS/2 Optical Mouse"
Option "Protocol" "explorerps/2"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
Driver "synaptics"
Identifier "Mouse"
Option "Device" "/dev/input/mice"
Option "Emulate3Buttons" "on"
Option "InputFashion" "Mouse"
Option "Name" "Synaptics;Touchpad"
Option "Protocol" "explorerps/2"
Option "SHMConfig" "on"
Option "Vendor" "Sysp"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
DisplaySize300 230
HorizSync 28-64
Identifier "Monitor"
ModelName "15 IN. COLOR"
VendorName "AT&T"
VertRefresh50-90
UseModes "Modes"
EndSection
Section "Modes"
Identifier "Modes"
Modeline "1024x768" 86.18 1024 1088 1200 1376 768 769 772 803
Modeline "1024x768" 73.89 1024 1080 1192 1360 768 769 772 799
Modeline "1024x768" 61.89 1024 1080 1184 1344 768 769 772 794
Modeline "800x600" 58.73 800 840 928 1056 600 601 604 632
Modeline "800x600" 51.73 800 840 928 1056 600 601 604 628
Modeline "800x600" 44.13 800 840 920 1040 600 601 604 624
Modeline "800x600" 36.88 800 832 912 1024 600 601 604 621
Modeline "768x576" 53.75 768 808 888 1008 576 577 580 606
Modeline "768x576" 47.41 768 808 888 1008 576 577 580 603
Modeline "768x576" 40.41 768 800 880 992 576 577 580 599
Modeline "768x576" 33.74 768 792 872 976 576 577 580 596
Modeline "640x480" 36.97 640 672 736 832 480 481 484 505
Modeline "640x480" 32.64 640 672 736 832 480 481 484 503
Modeline "640x480" 27.74 640 664 728 816 480 481 484 500
Modeline "640x480" 23.06 640 656 720 800 480 481 484 497
EndSection
Section "Screen"
DefaultDepth 24
SubSection "Display"
Depth 15
Modes "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 16
Modes "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 32
Modes "1024x768" "800x600" "768x576" "640x480"
EndSubSection
SubSection "Display"
Depth 8
Modes "1024x768" "800x600" "768x576" "640x480"
EndSubSection
Device "Device"
Identifier "Screen"
Monitor "Monitor"
EndSection
Section "Device"
BoardName "GeForce Go 6600 (0x0148)"
BusID "1:0:0"
Driver "nvidia"
Identifier "Device"
Option "XaaNoOffScreenPixmaps" "on"
Option "XaaNoPixmapCache" "on"
Screen 0
VendorName "NVidia"
Option "RenderAccel" "true"
Option "AllowGLXWithComposite" "true"
EndSection
Section "ServerLayout"
Identifier "Layout"
InputDevice"Keyboard" "CoreKeyboard"
InputDevice"Mouse" "CorePointer"
InputDevice"Mouse" "SendCoreEvents"
Option "Clone" "off"
Option "Xinerama" "off"
Screen "Screen"
EndSection
Section "DRI"
Group "video"
Mode 0660
EndSection
Section "Extensions"
EndSection
页:
[1]
2