哪位装了nvidia驱动的兄弟贴一下xorg.conf?

dogking 发表于 2006-6-3 17:27:27

哪位兄弟用三星的syncmaster 765mb 而且装了nvidia驱动啊？贴一下你的xorg.conf配置吧。。帮帮忙把～～～ :D
我的屏幕便宜老解决不了，xvidtune用不了。呵呵，愁死了……

哇msn 发表于 2006-6-3 22:00:04

我用的是VA721，xvidtune是什么？

xufan106 发表于 2006-6-3 22:41:19

好像基本不用怎么修改。。把 nv 改为 nvidia 或由安装程序修改就可以

heyuqi 发表于 2006-6-3 23:22:27

楼主说说你是怎么做的？修改过了什么？

dogking 发表于 2006-6-4 00:17:18

我原来没有装驱动，用vase。没有偏移。但是刷新率只能上到60，太费眼睛了。就下载了nvidia官方的驱动（我是GF4 mx440）。呵呵料定他一定会偏的～～我用nvidia替换了xorg.conf里的vase。用nvidia驱动。
然后用xvidtune去调整，本想将调整的添加到xorg.conf里。。呵呵，可惜xvidtune运行不了。。所以现在屏幕还是偏着。。想问问谁有调好的xrog配置。。我就不用这么整天看着这个偏移的屏幕了。。 :-)

dogking 发表于 2006-6-4 00:23:03

回3楼的，呵呵安装程序修改的有偏。呵呵，谁装了nv驱动，并且用三星syncmaster 765mb的，贴一下xorg.conf。我参考一下就，感激不尽了～～～ 8)8)8)

haulm 发表于 2006-6-4 02:18:23

给你也不能用，因为我显卡和你不一样，是GF5200，安装完nvidia驱动应该是正的，没装前才是偏的，不理解你的状况。并且GF MX440显卡驱动的驱动有可能不能用最新的驱动。建议你搜索下论坛，我有给出一个详细的修正过的nvidia驱动安装的说明。

toytrain 发表于 2006-6-4 09:22:25

我的是gf3ti200，763MB，用最新的驱动安装完后一切正常，nv也不用手工改成nvidia

dogking 发表于 2006-6-4 12:43:39

麻烦楼上的贴一下你的xorg.conf好吗？ :wink:

jiangtao9999 发表于 2006-6-4 18:09:55

nvidia 驱动的那个偏离才是正确的屏幕位置。

toytrain 发表于 2006-6-5 11:02:34

我显示器进水了，没敢开机，呵呵，不好意思

# Xorg configuration created by system-config-display

Section "ServerLayout"
Identifier "single head configuration"
Screen    0"Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath    "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/TTF"
FontPath "/usr/share/fonts/default/Type1"
FontPath "/usr/share/fonts/ttf/zh_CN"
EndSection

Section "Module"

#Load"dbe"
Load"extmod"
Load"fbdevhw"
Load"glx"
Load"record"
Load"freetype"
Load"type1"
#Load"dri"
Load"dri"
EndSection

Section "InputDevice"
Identifier"Keyboard0"
Driver    "keyboard"
Option    "XkbRules" "xfree86"
Option    "XbkModel" "pc105"
Option    "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier"Mouse0"
Driver    "mouse"
Option    "Protocol" "IMPS/2"
Option    "Device" "/dev/input/mice"
Option    "ZAxisMapping" "4 5"
Option    "Emulate3Buttons" "no"
EndSection

Section "Monitor"

### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Samsung SyncMaster 763MB/713MB/CD173D(P)"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 71.0
VertRefresh50.0 - 160.0
EndSection

Section "Device"
Identifier"Videocard0"
Driver    "nvidia"
VendorName"Videocard vendor"
BoardName "NVIDIA GeForce 3 (generic)"
EndSection

Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768" "800x600" "640x480"
EndSubSection
EndSection

xufan106 发表于 2006-6-5 12:04:18

syncmaster793 mx440
装上nvidia驱动后没有偏移。。。。
xorg是安装程序修改的。。。
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig:version 1.0(buildmeister@builder3)Wed Dec 14 16:39:22 PST 2005

# XFree86 4 configuration created by MagicInstaller.

Section "ServerLayout"
Identifier "Default Layout"
Screen    0"Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"
RgbPath       "/usr/X11R6/lib/X11/rgb"
FontPath    "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath    "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath    "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath    "/usr/X11R6/lib/X11/fonts/misc"
FontPath    "/usr/X11R6/lib/X11/fonts/Type1"
FontPath    "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath    "/usr/X11R6/lib/X11/fonts/TTF"
FontPath    "/usr/share/fonts/default/Type1"
FontPath    "/usr/share/fonts/ttf/zh_CN"
EndSection

Section "Module"
Load       "dbe"
Load       "extmod"
Load       "fbdevhw"
Load       "glx"
Load       "record"
Load       "freetype"
Load       "type1"
EndSection

Section "InputDevice"
Identifier "Keyboard0"
Driver       "kbd"
Option       "XbkModel" "pc105"
Option       "XkbLayout" "us"
EndSection

Section "InputDevice"
Identifier "Mouse0"
Driver       "mouse"
Option       "Protocol" "IMPS/2"
Option       "Device" "/dev/input/mice"
Option       "ZAxisMapping" "4 5"
Option       "Emulate3Buttons" "no"
EndSection

Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName    "Unknown monitor"
HorizSync    31.5 - 37.9
VertRefresh 50.0 - 70.0
EndSection

Section "Device"

#    VideoRam    0
Identifier "Videocard0"
Driver       "nvidia"
VendorName "Videocard vendor"
BoardName    "NVIDIA GeForce 4 MX (generic)"
EndSection

Section "Screen"
Identifier "Screen0"
Device       "Videocard0"
Monitor    "Monitor0"
DefaultDepth 24
SubSection "Display"
   Depth    8
   Modes    "800x600" "640x480"
EndSubSection
SubSection "Display"
   Depth    15
   Modes    "800x600" "640x480"
EndSubSection
SubSection "Display"
   Depth    16
   Modes    "1024x768" "800x600"
EndSubSection
SubSection "Display"
   Depth    24
   Modes    "1024x768" "800x600"
EndSubSection
EndSection

dogking 发表于 2006-6-5 14:01:22

呵呵，太感谢大家了！！！！！！！！！！！！！！ :P:P:P:P:P

页: [1]

中国Linux公社论坛's Archiver

哪位装了nvidia驱动的兄弟贴一下xorg.conf?