egreen521 发表于 2006-6-7 11:01:27

load the kernel failure

this is run imformation:

1,my skyeye version:skyeye-1.2-RC7-3.tar.bz2


2,
# ../skyeye-v1/binary/skyeye -e linux.2.4.x
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x807b868
SKYEYE: use arm7100 mmu ops
Loaded ROM   ./boot.rom
Segmentation fault

please tell me the reason.thank you very much.

3,skyeye.conf
cpu: arm7tdmi
mach: at91
mem_bank: map=M, type=RW, addr=0x00000000, size=0x00004000
mem_bank: map=M, type=RW, addr=0x01000000, size=0x00400000
mem_bank: map=M, type=R, addr=0x01400000, size=0x00400000, file=./boot.rom
mem_bank: map=M, type=RW, addr=0x02000000, size=0x00400000
mem_bank: map=M, type=RW, addr=0x02400000, size=0x00008000
mem_bank: map=M, type=RW, addr=0x04000000, size=0x00400000
mem_bank: map=I, type=RW, addr=0xf0000000, size=0x10000000
# state=on/off means simulated LCD is wired or not
#lcd: state=on

ksh 发表于 2006-6-8 00:07:52

当前是否存在boot.rom文件，格式是否正确？

egreen521 发表于 2006-6-8 15:56:31

存在阿，我用阿ARMulator加载时没有问题的。
是不时skyeye编译有问题啊。
页: [1]
查看完整版本: load the kernel failure