安装ati主板自带的显示卡驱动出现问题，大家帮帮
ML2.0安装在IBM－AM1上，显示卡是ati xpress200M,去ati网站下载了linux－notebook驱动，按照说明安装了，并在安装后运行aticonfig --initial，reboot系统，进不了GRAPHIC模式.是什么原因那？xorg是6。9版本的。是否有其他方面需要注意的，在这先谢哪位大侠了！！！！现在可以进入GRACHIC模式，但是分辨率只能是800X600，不能是1024X768，在xorg.conf修改会无效，并成640的
这是我机子xorg.conf配置表
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0"Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
FontPath "/usr/X11R6/lib/X11/fonts/misc/"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi/"
FontPath "/usr/share/fonts/"
EndSection
Section "Module"
Load"dbe"
Load"extmod"
Load"fbdevhw"
Load"glx"
Load"record"
Load"freetype"
Load"type1"
Load"dri"
EndSection
Section "InputDevice"
# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
# Option "Xleds" "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
# Option "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
# Option "XkbModel" "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
# Option "XkbModel" "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
# Option "XkbLayout" "de"
# or:
# Option "XkbLayout" "de"
# Option "XkbVariant" "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
# Option "XkbOptions" "ctrl:swapcaps"
# Or if you just want both to be control, use:
# Option "XkbOptions" "ctrl:nocaps"
#
Identifier"Keyboard0"
Driver "kbd"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier"Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
### Comment all HorizSync and VertSync values to use DDC:
### Comment all HorizSync and VertSync values to use DDC:
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Unknown monitor"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 31.5 - 37.9
VertRefresh50.0 - 70.0
Option "dpms"
EndSection
Section "Device"
Identifier"Videocard0"
Driver "vesa"
VendorName"Videocard vendor"
BoardName "ATI Technologies Inc RC410 "
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768" "640x480"
EndSubSection
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection 怎么就没人来说说拉 因为你没有贴错误输出。
/var/log/Xorg.0.log Section "Device"
Identifier "Videocard0"
Driver "vesa"
VendorName "Videocard vendor"
BoardName "ATI Technologies Inc RC410 "
EndSection
使用 vesa 驱动是否能支持 1024x768 分辨率？ 如果是CRT的话：
50x768=38400>37900
HorizSync 好像设小了
HSync 应该 > 50x768
液晶显示器不知道是不是也是这样的？ 我也碰到和楼主类似的问题，我根本不能startx HorizSync 31.5 - 37.9
VertRefresh 50.0 - 70.0
这两项应该按照你的显示器用户手册填写。驱动应该填写 ati 或 radeon 或 atimisc 或 r128 而不是 vesa。 估计是因为他没有更新 Xorg ，导致显卡驱动不能用。
有人回答了，楼主也没影了。
页:
[1]