mrzx 发表于 2006-8-3 21:07:08

请问在FC5下如何修改显示器刷新率阿

请问如何修改FC5的屏幕刷新率。在X配置文件是/etc/X11/xorg.conf我已经找到了配置文件，可就是不知道如何修改。文件内容如下

# XFree86 4 configuration created by pyxf86config

Section "ServerLayout"
    Identifier   "Default Layout"
    Screen      0"Screen0" 0 0
    InputDevice    "Mouse0" "CorePointer"
    InputDevice    "Keyboard0" "CoreKeyboard"
EndSection

Section "Files"

# Multiple FontPath entries are allowed (they are concatenated together)
# By default, a font server independent of the X server is
# used to render fonts.
    FontPath   "unix/:7100"
EndSection

Section "Module"
    Load"dbe"
    Load"extmod"
    Load"fbdevhw"
    Load"glx"
    Load"record"
    Load"freetype"
    Load"type1"
    Load"dri"
EndSection

Section "InputDevice"

# Specify which keyboard LEDs can be user-controlled (eg, with xset(1))
#    Option    "Xleds"      "1 2 3"
# To disable the XKEYBOARD extension, uncomment XkbDisable.
#    Option    "XkbDisable"
# To customise the XKB settings to suit your keyboard, modify the
# lines below (which are the defaults).For example, for a non-U.S.
# keyboard, you will probably want to use:
#    Option    "XkbModel"    "pc102"
# If you have a US Microsoft Natural keyboard, you can use:
#    Option    "XkbModel"    "microsoft"
#
# Then to change the language, change the Layout setting.
# For example, a german layout can be obtained with:
#    Option    "XkbLayout"    "de"
# or:
#    Option    "XkbLayout"    "de"
#    Option    "XkbVariant"    "nodeadkeys"
#
# If you'd like to switch the positions of your capslock and
# control keys, use:
#    Option    "XkbOptions"    "ctrl:swapcaps"
# Or if you just want both to be control, use:
#    Option    "XkbOptions"    "ctrl:nocaps"
#
    Identifier"Keyboard0"
    Driver      "kbd"
    Option      "XkbModel" "pc105"
    Option      "XkbLayout" "us"
    Option      "XkbVariant" "intl"
EndSection

Section "InputDevice"
    Identifier"Mouse0"
    Driver      "mouse"
    Option      "Protocol" "IMPS/2"
    Option      "Device" "/dev/input/mice"
    Option      "ZAxisMapping" "4 5"
    Option      "Emulate3Buttons" "yes"
EndSection

Section "Monitor"

### Comment all HorizSync and VertSync values to use DDC:
    Identifier   "Monitor0"
    VendorName   "Monitor Vendor"
    ModelName    "PH107E/V/S/G"
    DisplaySize310    230
### Comment all HorizSync and VertSync values to use DDC:
    HorizSync    30.0 - 71.0
    VertRefresh50.0 - 160.0
    Option      "dpms"
EndSection

Section "Device"
    Identifier"Videocard0"
    Driver      "radeon"
    VendorName"Videocard vendor"
    BoardName   "ATI Technologies Inc RV350 AR "
EndSection

Section "Screen"
    Identifier "Screen0"
    Device   "Videocard0"
    Monitor    "Monitor0"
    DefaultDepth   24
    SubSection "Display"
      Viewport   0 0
      Depth   16
      Modes    "800x600" "640x480"
    EndSubSection
    SubSection "Display"
      Viewport   0 0
      Depth   24
      Modes    "1280x1024"
    EndSubSection
EndSection

Section "DRI"
    Group      0
    Mode         0666
EndSection

mrzx 发表于 2006-8-5 12:08:21

实在不好意思，但求问心切，谢谢
哪位高人请回答下吧

NoCat 发表于 2006-8-5 17:46:21

### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 71.0
VertRefresh 50.0 - 160.0

这里跟刷新有关，可以把它锁室到某一个数值,V就是我们常说的那个刷新

NoCat 发表于 2006-8-5 17:48:11

补充一句，请确保你的显示器能支持你所设定的刷新数值.

mrzx 发表于 2006-8-5 22:11:28

1024*768最大支持85MHZ
我想修改到1024*768 75MHZ
谢谢

上网我也搜了很多，都没有这方面的介绍。

heroking 发表于 2006-8-15 12:19:00

VertRefresh 50.0 - 160.0

把数值改为75试试。

mrzx 发表于 2006-8-15 19:45:47

谢谢，问题已解决，看来只有修改配置文件才会有用啊。
页: [1]
查看完整版本: 请问在FC5下如何修改显示器刷新率阿