装完ATI的驱动之后,怎么把opengl设置成ATI的
我用Debian3.1 testing ,ATI9550下载官方驱动
然后 ./ati-driver-installer-8.27.10-x86.run
选第一项->automatic->exit
最后aticonfig --initial
重启后fglrxinfo显示的是这个
display: :0.0 screen: 0
OpenGL vendor string: Mesa project: www.mesa3d.org
OpenGL renderer string: Mesa GLX Indirect
OpenGL version string: 1.2 (1.5 Mesa 6.4.2)
难道我哪个步骤错了吗？？？
我的xorg.conf如下
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "aticonfig-Screen" 0 0
InputDevice "Generic Keyboard"
InputDevice "Configured Mouse"
EndSection
Section "Files"
# if the local font server has problems, we can fall back on these
FontPath "unix/:7100"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/lib/X11/fonts/misc"
FontPath "/usr/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/X11/Type1"
FontPath "/usr/lib/X11/fonts/Type1"
FontPath "/usr/lib/X11/fonts/Speedo"
FontPath "/usr/local/share/fonts"
FontPath "/usr/share/fonts"
FontPath "/usr/X11R6/lib/X11/fonts"
FontPath "/usr/share/fonts/jfbterm"
EndSection
Section "Module"
Load "bitmap"
Load "dbe"
Load "ddc"
Load "dri"
Load "extmod"
Load "freetype"
Load "glx"
Load "int10"
Load "record"
Load "type1"
Load "vbe"
EndSection
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbRules" "xfree86"
Option "XkbModel" "pc104"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
Option "CorePointer"
Option "Device" "/dev/psaux"
Option "Protocol" "ImPS/2"
Option "Emulate3Buttons" "true"
Option "ZAxisMapping" "4 5"
EndSection
Section "Monitor"
Identifier "Generic Monitor"
HorizSync 30.0 - 60.0
VertRefresh 50.0 - 75.0
Option "DPMS"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Generic Video Card"
Driver "vesa"
Option "UseFBDev" "true"
EndSection
Section "Device"
Identifier "aticonfig-Device"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "Default Screen"
Device "Generic Video Card"
Monitor "Generic Monitor"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen"
Identifier "aticonfig-Screen"
Device "aticonfig-Device"
Monitor "aticonfig-Monitor"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection 去rpm.livna.org找驱动，官网上的这个驱动不好用。
下载：
kmod-fglrx-... ....rpm
xorg-x11-... ...rpm
两个包，先装xorg-x11，再装kmod-fglrx，再
aticonfig --initial --input=/etc/X11/xorg.conf
重启动以后就可以用ATI的OpenGL了。
页:
[1]