请教个关于filesystem的问题
事情是这样的我现在手头有一个RAID硬盘柜，4.7T，还有一个DELL的server sc1850
server的硬盘和RAID的硬盘都是SCSI的，通过SCSI card连接在一起
我现在想把RAID mount 到 dell server上面
我的操作是
1.dell server安装操作系统 CENTOS v4.3
2.划分RAID的partitons为2T，2T，300G
3.less /var/log/dmesg | grep sd 来确认是否都正确认出来3个partitions
4.fdisk /dev/sda ; fdisk /dev/sdb ; fdisk /dev/sdc依次创建filesystem
5.mkfs -t ext3 /dev/sda1 来格式化创建的分区
6.mount -t ext3 /dev/sda1 /u/disk1 来把格式化好的filesystem mount到dell server上
可是现在第五步总是有问题
错误的message是
---------------------------------------------------------------------------------------------------------
# mkfs -t ext3 /dev/sda1
mke2fs 1.35 (28-Feb-2004)
Filesystem label=
OS type: Linux
Block size=4096 (log=2)
Fragment size=4096 (log=2)
256000000 inodes, 511999574 blocks
25599978 blocks (5.00%) reserved for the super user
First data block=0
Maximum filesystem blocks=515899392
15625 block groups
32768 blocks per group, 32768 fragments per group
16384 inodes per group
Superblock backups stored on blocks:
32768, 98304, 163840, 229376, 294912, 819200, 884736, 1605632, 2654208,
4096000, 7962624, 11239424, 20480000, 23887872, 71663616, 78675968,
102400000, 214990848
Writing inode tables: done
ext2fs_mkdir: Attempt to read block from filesystem resulted in short read while creating root dir
---------------------------------------------------------------------------------------------------------
，不知道是我的操作步骤不对还是什么，请兄弟们看看
页:
[1]