无法刻录
用k3b刻录，提示错误 "mkisofs did not exit cleanly"k3b错误日志如下:
System
-----------------------
K3b Version: 0.12.15
KDE Version: 3.5.4-10.fc6 Fedora-Core
QT Version:3.3.7
Kernel: 2.6.18-1.2798.fc6
Devices
-----------------------
DVD-ROM 16X 5.KV (/dev/hdd, ) at
ASUS DRW-1608P3S 1.24 (/dev/hdc, ) at
K3b
-----------------------
Size of filesystem calculated: 279288
Used versions
-----------------------
cdrecord: 2.1
cdrecord
-----------------------
/usr/bin/cdrecord: Cannot allocate memory. WARNING: Cannot do mlockall(2).
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
scsidev: '/dev/hdc'
devname: '/dev/hdc'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
/usr/bin/cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
Cdrecord-Clone 2.01 (cpu-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 3 = CD-ROM XA mode 2
Using libscg version 'schily-0.8'.
Driveropts: 'burnfree'
atapi: 1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'ASUS '
Identifikation : 'DRW-1608P3S '
Revision : '1.24'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009
Profile: 0x002B
Profile: 0x001B
Profile: 0x001A
Profile: 0x0016
Profile: 0x0015
Profile: 0x0014
Profile: 0x0013
Profile: 0x0012
Profile: 0x0002
Profile: 0x0011
Profile: 0x0010
Profile: 0x000A
Profile: 0x0009 (current)
Profile: 0x0008
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1267712 = 1238 KB
FIFO size : 4194304 = 4096 KB
/usr/bin/cdrecord: Operation not permitted. WARNING: Cannot set RR-scheduler
/usr/bin/cdrecord: Permission denied. WARNING: Cannot set priority using setpriority().
/usr/bin/cdrecord: WARNING: This causes a high risk for buffer underruns.
Track 01: data 545 MB
Total size: 626 MB (62:03.86) = 279290 sectors
Lout start: 626 MB (62:05/65) = 279290 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in:-11607 (97:27/18)
ATIP start of lead out: 359849 (79:59/74)
Disk type: Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 80559
Starting to write CD/DVD at speed 32 in real TAO mode for multi session.
Last chance to quit, starting real write in 2 seconds.
1 seconds.
0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
Turning BURN-Free on
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of545 MB written.
/usr/bin/cdrecord: Success. write_g1: scsi sendcmd: no error
CDB:2A 00 00 00 00 F8 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 04 00 00 00 00 0E 00 00 00 00 08 03 00 00
Sense Key: 0x4 Hardware Error, Segment 0
Sense Code: 0x08 Qual 0x03 (logical unit communication crc error (ultra-dma/32)) Fru 0x0
Sense flags: Blk 0 (not valid)
resid: 63488
cmd finished after 0.002s timeout 40s
/usr/bin/cdrecord: A write error occured.
/usr/bin/cdrecord: Please properly read the error message above.
write track data: error after 507904 bytes
Writingtime: 21.854s
Average write speed 517.6x.
Fixating...
Fixating time: 16.747s
/usr/bin/cdrecord: fifo had 72 puts and 9 gets.
/usr/bin/cdrecord: fifo was 0 times empty and 2 times full, min fill was 93%.
cdrecord command:
-----------------------
/usr/bin/cdrecord -v gracetime=2 dev=/dev/hdc speed=32 -tao driveropts=burnfree -eject -multi -xa -tsize=279288s -
mkisofs
-----------------------
279288
INFO: UTF-8 character encoding detected by locale settings.
Assuming UTF-8 encoded filenames on source filesystem,
use -input-charset to override.
0.18% done, estimate finish Fri Nov 10 22:21:42 2006
0.36% done, estimate finish Fri Nov 10 22:21:42 2006
0.54% done, estimate finish Fri Nov 10 22:21:42 2006
0.72% done, estimate finish Fri Nov 10 22:21:42 2006
mkisofs command:
-----------------------
/usr/bin/mkisofs -gui -graft-points -volid K3b data project -volset-appid K3B THE CD KREATOR (C) 1998-2005 SEBASTIAN TRUEG AND THE K3B TEAM -publisher-preparer-sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-bruce/k3bAuImqb.tmp -rational-rock -hide-list /tmp/kde-bruce/k3b7yygqc.tmp -joliet -hide-joliet-list /tmp/kde-bruce/k3b777RFb.tmp -full-iso9660-filenames -iso-level 2 -path-list /tmp/kde-bruce/k3bx9PVsc.tmp
请高手指点一二 你试试用ROOT权限刻录吧 没用，错误依旧.
页:
[1]