skyeye模拟44b0调试内核的问题！
我运行后确出现如下的提示：$ skyeye -e linux
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name s3c44b0, mach_init addr 0x8065e10
ethmod num=1, mac addr=0:0:0:0:0:0, hostip=192.168.1.9
tapif_init:open: Permission denied
-----------------------------------------------------------
NOTICE: you should be root at first !!!
NOTICE: you should inmod linux kernel net driver tun.o!!!
NOTICE: if you don't make device node, you should do commands:
NOTICE: mkdir /dev/net; mknod /dev/net/tun c 10 200
NOTICE: now the net simulation function can not support!!!
NOTICE: Please read SkyEye.README and try again!!!
-----------------------------------------------------------
dbct info: turn off dbct!
SKYEYE: use arm7100 mmu ops
Loaded RAM ./linux
exec file "linux"'s format is elf32-little.
load section .text: addr = 0x0c200000size = 0x00067f34.
load section .data: addr = 0x0c267f34size = 0x00000000.
not load section .bss: addr = 0x0c267f34size = 0x00008438 .
not load section .stack: addr = 0x0c27036csize = 0x00001000 .
not load section .comment: addr = 0x00000000size = 0x00000026 .
start addr is set to 0x0c200000 by exec file.
然后就停在那里不动了，我估计可能是skyeye.conf配置的不对，一并贴出来，大家帮忙监察一下：
cpu: arm7tdmi
mach: s3c44b0
mem_bank: map=M, type=RW, addr=0x0c000000, size=0x00600000
mem_bank: map=M, type=RW, addr=0x0c200000, size=0x00200000, file=./linux
mem_bank: map=M, type=R,addr=0x00000000, size=0x00400000
mem_bank: map=I, type=RW, addr=0x03ff0000, size=0x00010000
net: type=s3c44b0, hostip=192.168.1.9, ethmod=tuntap
dbct:state=off
谢谢了！ 是不是需要一个放中断向量表的bootrom? 请问你的bootrom代码,能共享看一下不?
页:
[1]