版主救命skyeye无法正常启动linux 已解决
我的系统是FC5arm-elf-tools-20030314
skyeye-v1.2_Rel
测试包是skyeye-binary-testutils-1.0.4
运行skyeye -h，正常。
在测试目录下运行skyeye linux
都停止在启动文件处。
一：
# skyeye
SKYEYE: If you have ELF kernel file, please use -e option to indicate your ELF format kernel filename
SKYEYE: If you only have kernel binary image, you should put the filename of kernel binary image in skyeye.conf file
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name s3c4510b, mach_init addr 0x8063ab0
SKYEYE: use arm7100 mmu ops
Loaded ROM ./romfs.img
二：
# skyeye linux
SKYEYE: If you have ELF kernel file, please use -e option to indicate your ELF f ormat kernel filename
SKYEYE: If you only have kernel binary image, you should put the filename of ker nel binary image in skyeye.conf file
Non-option argument linux
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x80631b0
ethmod num=1, mac addr=0:4:3:2:1:f, hostip=10.0.0.1
can't find device module: (null)
log_info: log is off.
log_info:log file is /tmp/test.log, fd is 0xa08d2a0
log_info: log start clock 3200000
log_info: log end clock 3330000
SKYEYE: use arm7100 mmu ops
Loaded ROM ./boot.rom 加上 －e 选项就好了。 :oops::oops::oops::oops:
谢谢楼上
页:
[1]