xconfig显卡内存时出错后鼠标滚轮失灵，屏幕被拉长
xconfig探测屏幕的时候，报显卡内存出错，于是手动选择内存，位数，分辨率后。重启发现不能进入图形界面， 于是startx
发现鼠标滚轮失灵，屏幕被拉长
查看inittab，发现init id被改成了3, 改回为5后重启，可以直接进入图形界面,这个问题解决。
但是mouseconfig后，鼠标滚轮还是无效
仔细查看里XF86Config 没发现什么问题： 里边鼠标的配置为
_________________________________________________
Section "InputDevice"
Identifier "Mouse0"
# Modified by mouseconfig
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "PS/2"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
_____________________________________________________
显卡
_______________________________________________________
Section "Device"
Identifier "Videocard0"
Driver "nv"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce 2 MX (generic)"
VideoRam 32768
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 16
SubSection "Display16"
Depth 16
Modes "1024x768"
EndSubSection
EndSection
__________________________________________
显示器是实验室清华同方品牌机的17寸纯平，没有型号
____________________________________________
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Acer V771" （原来用的Acer的，今天换成同方，所以xconfig，结果才发现没型号，所以这里没改）
HorizSync 30.0 - 72.0
VertRefresh 50.0 - 120.0
EndSection
_______________________________________________
等待解决，谢谢！ VertRefresh 50.0 - 120.0
这个是否太高了？我用液晶，没注意过 crt 的参数
页:
[1]