让人恼火的安装问题
小弟我一心想加入Linux的大家庭，学习更多的知识，在面前的这台机子上安装了N多次，却每一次成功过（有时真想砸了它），总是装了卸，卸了装。。。试过Redhat9.0（没有图形界面），Mandriva，FC6（Mandriva和FC6进入界面后，按Enter准备安装就挂了，要么重启，要么蹦n多16进制的错误码，Magic也是。还是Suse好点，Suse10.1 Suse10.2都试过，都是一切正常地安装完后重启时，系统进不了，就是那个小圈转了两三下就死了。Suse在同学的笔记本上还装的上，运行的好好的。郁闷。。。
然后发现Suse盘有个Firmware Test，固件测试吧，检测了一下，我也不怎么看得懂，具体如下：
Linux-ready Firmware Developer Kit-Release O-(c)2006 Intel Corperation
Test results: 6 fail, 1 warn, 11 pass, 18 total
DSDT AML verification
W Reserved methed must return a value (_WAK) in \_WAK.
F Methed local variable is not initialized (Local 0) in \_SI._MSG.
F Methed local variable is not initialized (Local 0) in \_SI._SST.
Tested table DSDT.dsl
ACPI passive thermal trip points
F Changing passive point seems uneffective in Zone THEM.
FADT test
F E820: XSDT (ox1f7f31801f7f30c0) is not in reserved or ACPI memory!
ACPI mode, SCI_EN bit in PM1a_Control register is correctly enabled.
F E820: XSDT (0x1f7f31801f7f30c0) is not in reserved or ACPI memory!
MCFG PCI Express* memory mapped config space
F E820: XSDT (0x1f7f31801f7f30c0) is not in reserved or ACPI memory!
W NO MCFG PCI ACPI table foound. Tjis table is required for PCI Express*.
(expreimental) ACPI Edge/Level check
F Non-Legacy interrupt 0 is incorrect edge triggered
F Non-Legacy interrupt 1 is incorrect edge triggered
F Non-Legacy interrupt 6 is incorrect edge triggered
F Non-Legacy interrupt 8 is incorrect edge triggered
F Non-Legacy interrupt 12 is incorrect edge triggered
F Non-Legacy interrupt 14 is incorrect edge triggered
HPET configuration test
F Failed to locate HPET base
CPU frequency scaling tests
W Frequency scaling not supported
EDD Boot disl hinting
device 80: The system boots from device 0000:00:1f.1 channel:0 device:1
device 80: The boot disk has Linux device name /dev/hdb
Processor microcode update
kernel too old; the kernel does not expert microcode version
kernel too old; the kernel does not expert microcode version
Fan texts
Fan FAN is currently is state(null)
Ethernet functionality
Acquired ethernet link after 0 seconds
Get a DHCP lease
General ACPI information
DSDT was compiled by the Microsoft AML compiler
DMI information check
MTRR validation
Validate assigned PCI resources
PCI Express MaxReadReq tuning
OS/2 memory hole test
Battery tests
No battery information present
（这是我从电脑上抄下来，又打进去的，可能有几个单词有误，还望各位将就一下）
下面是我的硬件细节：
操作系统 Microsoft Windows XP Professional 5.1.2600 (WinXP Retail)
计算机类型 ACPI Multiprocessor PC
CPU 类型 DualCore Intel Pentium D 805, 2666 MHz (20 x 133)
主板芯片组 Intel Morgan Hill i865GV
系统内存 503 MB(PC3200 DDR SDRAM)
BIOS 类型 Award (05/08/06)
显示卡 Intel(R) 82865G Graphics Controller
显示卡 NVIDIA GeForce FX 5200(128 MB)
3D 加速器 Intel Extreme Graphics 2
3D 加速器 nVIDIA GeForce FX 5200
显示器 KTC K-7005L(162235)
存储器:
IDE 控制器 Intel(R) 82801EB Ultra ATA Storage Controllers
IDE 控制器 Intel(R) 82801EB Ultra ATA Storage Controllers
SCSI/RAID 控制器 SCSI/RAID Host Controller
磁盘驱动器 WDC WD1600BB-56RDA0(139 GB, IDE)
光盘驱动器 CK3127O YOP785P SCSI CdRom Device
光盘驱动器 PIONEER DVD-RWDVR-112
硬盘 SMART 状态 OK
分区:
C: (FAT32) 9991 MB (5168 MB 可用)
D: (FAT32) 19992 MB (9606 MB 可用)
E: (FAT32) 19992 MB (13608 MB 可用)
F: (FAT32) 19992 MB (11557 MB 可用)
G: (NTFS) 20002 MB (19910 MB 可用)
总计容量 87.9 GB (58.4 GB 可用)
麻烦各位大哥分析一下，到底有什么问题，小弟感激不尽 :cry: 进bios关掉acpi试试 很简单，linux acpi=off noapic然后回车就行了，不过倾向于用FC6，不错的
页:
[1]