刚装的magic改不了分辨率,无奈发贴求助
用了Ubuntu 7.04感觉中文化不够，刚装的magic改不了分辨率，我的是AOC 193SW 19寸宽屏 分辨率为1440*900,在论坛搜索了两天没搞定，无奈发贴求助。我的xorg.conf
# Xorg configuration created by system-config-display
Section "ServerLayout"
Identifier "single head configuration"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
RgbPath "/usr/X11R6/lib/X11/rgb"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/75dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/100dpi:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/misc"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/X11R6/lib/X11/fonts/cyrillic"
FontPath "/usr/X11R6/lib/X11/fonts/TTF"
FontPath "/usr/share/fonts/default/Type1"
FontPath "/usr/share/fonts/ttf/zh_CN"
EndSection
Section "Module"
Load "dbe"
Load "extmod"
Load "fbdevhw"
Load "glx"
Load "record"
Load "freetype"
Load "type1"
Load "dri"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbRules" "xfree86"
Option "XbkModel" "pc105"
Option "XkbLayout" "us"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5"
Option "Emulate3Buttons" "yes"
EndSection
Section "Monitor"
# 1440x900 @ 60.00 Hz (GTF) hsync: 55.92 kHz; pclk: 106.47 MHz
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "193SW"
### Comment all HorizSync and VertSync values to use DDC:
HorizSync 30.0 - 82.0
VertRefresh 56.0 - 76.0
ModeLine "1440x900_60.00" 106.5 1440 1520 1672 1904 900 901 904 932 -hsync +vsync
Option "dpms" "true"
EndSection
Section "Device"
Identifier "Videocard0"
Driver "nv"
VendorName "Videocard vendor"
BoardName "NVIDIA GeForce FX (generic)"
VideoRam 131072
EndSection
Section "Screen"
Identifier "Screen0"
Device "Videocard0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1440x900" "1024x768" "800x600" "640x480"
EndSubSection
EndSection 我的是BENQ FP92W,是19宽屏的，我的分辨率搞好了，就是刷新率52，不过还可以，低于52的刷新率，就非常的的模糊不清晰，但不敢调得太高，太高怕烧了，因为在FAQ顶置帖里说了，“HorizSync 30.0 - 82.0
VertRefresh 56.0 - 76.0 ”太低刷新率上不去，你安装显卡驱动后是可以调的，（我的显卡是7300GT）我在没有用nvidia的7系列显卡驱动前，分辨率的不能调到
1440x900，安装好后就有那个选项了，另外也可以在NVIDIA Xserver里有调的，可调分辨率，还可调刷新率，不过刷新率调得太高不好，显示器说明书里说了，在显示器的标准值里是没有问题的。
你看FAQ顶置帖，应该可以搞定的 安装官方显卡驱动，不要设置刷新率，只在分辨率里面增加你的显卡和显示器支持的格式。把你最常用的分辨率放在第一个。（其实不加分辨率的设置的话，应该你的显卡驱动会自动监测显示器支持的最高分辨率） 我试试，不行的话还是去用ubuntu了 我下载了NVIDIA-Linux-x86-1.0-9755-pkg1.run
用root登录，不会安装啊！教教我 :roll:
那你就先凑合忍忍吧………… 显然你没有看 FAQ。 终于装好我的FX 5200了，分辨率也能到1440*900了，差点就放弃Magiclinux。在这里谢谢各位了！！！
页:
[1]