skyeye模拟smdk2410网络问题！
大家好！我在用skyeye模拟s3c2410的时候，驱动用的 是cs8900a，进去文件系统后，ping 我的linux主机（172.16.3.3）不通，结果如下：08:00:3e:26:0a:5b是模拟板的 MAC地址
/ $ ping 172.16.3.3
PING 172.16.3.3 (172.16.3.3): 56 data bytes
eth0: recv 70 byte frame 33:33:00:00:00:02 to b2:7f:c3:4b:3b:fc type 86dd
eth0: send 42 byte frame ff:ff:ff:ff:ff:ff to 08:00:3e:26:0a:5b type 0806
eth0: send 42 byte frame ff:ff:ff:ff:ff:ff to 08:00:3e:26:0a:5b type 0806
eth0: send 42 byte frame ff:ff:ff:ff:ff:ff to 08:00:3e:26:0a:5b type 0806
eth0: send 42 byte frame ff:ff:ff:ff:ff:ff to 08:00:3e:26:0a:5b type 0806
eth0: send 42 byte frame ff:ff:ff:ff:ff:ff to 08:00:3e:26:0a:5b type 0806
eth0: send 42 byte frame ff:ff:ff:ff:ff:ff to 08:00:3e:26:0a:5b type 0806
eth0: send 42 byte frame ff:ff:ff:ff:ff:ff to 08:00:3e:26:0a:5b type 0806
eth0: send 42 byte frame ff:ff:ff:ff:ff:ff to 08:00:3e:26:0a:5b type 0806
eth0: send 42 byte frame ff:ff:ff:ff:ff:ff to 08:00:3e:26:0a:5b type 0806
ping 模拟板自己的 ip(172.16.3.2)可以 通
/ $ ping 172.16.3.2
PING 172.16.3.2 (172.16.3.2): 56 data bytes
64 bytes from 172.16.3.2: icmp_seq=0 ttl=64 time=0.1 ms
64 bytes from 172.16.3.2: icmp_seq=1 ttl=64 time=0.0 ms
64 bytes from 172.16.3.2: icmp_seq=2 ttl=64 time=0.0 ms
我的 skyeye关于网卡部分如下：
Cirrus Logic CS8900A driver for Linux (Modified for SMDK2410)
eth0: CS8900A rev D at 0xe9000300 irq=53, no eeprom , addr: 08: 0:3E:26:0A:5B
mice: PS/2 mouse device common for all mice
NET: Registered protocol family 2
IP route cache hash table entries: 256 (order: -2, 1024 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
TCP reno registered
TCP bic registered
NET: Registered protocol family 1
不知道为什么 no eeprom ????
是不是这个原因呢？请高手指点！！！
up! i also have this problem!
and how to cancel ping on sim target, i press ctrl+c, the target quit ping-n2 www.163.comPing 2次
页:
[1]