cheng21884998 发表于 2007-11-23 10:00:23

VMWare 3.1 server + skyeye +uClinux 问题

在我的试验中执行如下:
我的uClinux正常吗?为啥没出现(skyeye) target sim(skyeye) load (skyeye) run?
还有网卡好像ping不通
# skyeye -e linux-2.4.x/linux
big_endian is false.
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x807853c
ethmod num=1, mac addr=1:41:31:21:11:f1, hostip=192.168.10.30
can't find device module: (name:net, type:(null))
uart_mod:0, desc_in:, desc_out:, converter:
SKYEYE: use arm7100 mmu ops
Loaded ROM   images/romfs.img
exec file "linux-2.4.x/linux"'s format is elf32-little.
load section .init: addr = 0x01000000size = 0x0000a000.
load section .text: addr = 0x0100a000size = 0x000d8de0.
load section .data: addr = 0x010e4000size = 0x00009ba4.
not load section .bss: addr = 0x010edbc0size = 0x00021fe0 .
not load section .debug_abbrev: addr = 0x00000000size = 0x0003ca29 .
not load section .debug_info: addr = 0x00000000size = 0x01822fe1 .
not load section .debug_line: addr = 0x00000000size = 0x002b18d6 .
not load section .debug_pubnames: addr = 0x00000000size = 0x0000c09d .
not load section .debug_aranges: addr = 0x00000000size = 0x000023f0 .
start addr is set to 0x01000000 by exec file.
Linux version 2.4.27-uc1 (root@linux2) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #1 四 11月 22 14:43:48 CST 2007
Processor: Atmel AT91M40xxx revision 0
Architecture: EB01
On node 0 totalpages: 1024
zone(0): 0 pages.
zone(1): 1024 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0
Calibrating delay loop... 15.82 BogoMIPS
Memory: 4MB = 4MB total
Memory: 2952KB available (867K code, 179K data, 40K init)
Dentry cache hash table entries: 512 (order: 0, 4096 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 1024 (order: 0, 4096 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Atmel USART driver version 0.99
ttyS0 at 0xfffd0000 (irq = 2) is a builtin Atmel APB USART
ttyS1 at 0xfffcc000 (irq = 3) is a builtin Atmel APB USART
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 1400000-14AFBFF (RO)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (romfs filesystem) readonly.
Shell invoked to run file: /etc/rc
Command: hostname GDB-ARMulator
Command: /bin/expand /etc/ramfs.img /dev/ram0
Command: mount -t proc proc /proc
Command: mount -t ext2 /dev/ram0 /var
Command: mkdir /var/tmp
Command: mkdir /var/log
Command: mkdir /var/run
Command: mkdir /var/lock
Command: mkdir /var/empty
Command: cat /etc/motd
Welcome to
          ____ __
         /__| ||_|
    _   _| || | _ _____   ___
   | | | | || || |_ \| | | |\ \/ /
   | |_| | |__| || | | | | |_| |/    \
   |___\____|_||_|_| |_|\____|\_/\_/
   | |
   |_|

GDB/ARMulator support by <[email protected]>
For further information check:
http://www.uclinux.org/

Execution Finished, Exiting

Sash command shell (version 1.1.1)
/>

cheng21884998 发表于 2007-11-24 12:13:43

为啥没人哪？

ksh 发表于 2007-11-25 21:13:15

1. Please read the latest document in skyeye.org. Or read the README file in source package.
2. Need netcard driver, and you can get it from skyeye svn.

cheng21884998 发表于 2007-11-28 11:43:22

能说的具体些吗，否则该留言对我没有什么帮助

cheng21884998 发表于 2007-11-28 16:57:27

can't find device module: (name:net, typenull))
谁能帮着解决一下网卡的问题

ksh 发表于 2007-11-28 20:14:48

run skyeyeas root

ksh 发表于 2007-11-28 20:16:48

You can refer to http://lists.gro.clinux.org/pipermail/skyeye-developer/2007-July/001442.html

cheng21884998 发表于 2007-11-29 11:00:56

感谢各位,该实验还在进行中,但又遇到了新问题,设定目标机的ipd地址后,从其它主机可以ping通目标主机,但从目标主机(uClinux内)却无法ping通其它计算机,连自己也ping不通:
如下:
big_endian is false.
arch: arm
cpu info: armv3, arm7tdmi, 41007700, fff8ff00, 0
mach info: name at91, mach_init addr 0x807853c
ethmod num=1, mac addr=0:4:3:2:1:f, hostip=192.168.10.10
uart_mod:0, desc_in:, desc_out:, converter:
SKYEYE: use arm7100 mmu ops
Loaded ROM   images/romfs.img
exec file "linux-2.4.x/linux"'s format is elf32-little.
load section .init: addr = 0x01000000size = 0x0000a000.
load section .text: addr = 0x0100a000size = 0x000d97b0.
load section .data: addr = 0x010e4000size = 0x00009d14.
not load section .bss: addr = 0x010edd20size = 0x00021fe0 .
not load section .debug_abbrev: addr = 0x00000000size = 0x0003ce97 .
not load section .debug_info: addr = 0x00000000size = 0x0183f092 .
not load section .debug_line: addr = 0x00000000size = 0x002b4768 .
not load section .debug_pubnames: addr = 0x00000000size = 0x0000c0ed .
not load section .debug_aranges: addr = 0x00000000size = 0x00002420 .
start addr is set to 0x01000000 by exec file.
Linux version 2.4.27-uc1 (root@linux2) (gcc version 2.95.3 20010315 (release)(ColdFire patches - 20010318 from http://fiddes.net/coldfire/)(uClinux XIP and shared lib patches from http://www.snapgear.com/)) #1 四 11月 29 08:49:50 CST 2007
Processor: Atmel AT91M40xxx revision 0
Architecture: EB01
On node 0 totalpages: 1024
zone(0): 0 pages.
zone(1): 1024 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/rom0
Calibrating delay loop... 15.82 BogoMIPS
Memory: 4MB = 4MB total
Memory: 2952KB available (869K code, 177K data, 40K init)
Dentry cache hash table entries: 512 (order: 0, 4096 bytes)
Inode cache hash table entries: 512 (order: 0, 4096 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 1024 (order: 0, 4096 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
Atmel USART driver version 0.99
ttyS0 at 0xfffd0000 (irq = 2) is a builtin Atmel APB USART
ttyS1 at 0xfffcc000 (irq = 3) is a builtin Atmel APB USART
Blkmem copyright 1998,1999 D. Jeff Dionne
Blkmem copyright 1998 Kenneth Albanowski
Blkmem 1 disk images:
0: 1400000-14AFBFF (RO)
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
Samsung S3C44B0 Rtl8019as driver version 0.1 (2002-02-20) <[email protected]>
eth0: 12:34:56:78:90:ab
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 512 bind 512)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (romfs filesystem) readonly.
Shell invoked to run file: /etc/rc
Command: hostname GDB-ARMulator
Command: /bin/expand /etc/ramfs.img /dev/ram0
Command: mount -t proc proc /proc
Command: mount -t ext2 /dev/ram0 /var
Command: mkdir /var/tmp
Command: mkdir /var/log
Command: mkdir /var/run
Command: mkdir /var/lock
Command: mkdir /var/empty
Command: cat /etc/motd
Welcome to
          ____ __
         /__| ||_|
    _   _| || | _ _____   ___
   | | | | || || |_ \| | | |\ \/ /
   | |_| | |__| || | | | | |_| |/    \
   |___\____|_||_|_| |_|\____|\_/\_/
   | |
   |_|

GDB/ARMulator support by <[email protected]>
For further information check:
http://www.uclinux.org/

Execution Finished, Exiting

Sash command shell (version 1.1.1)
/> ifconfig eth0 192.168.10.10
/> ping 192.168.10.10
PING 192.168.10.10 (192.168.10.10): 56 data bytes
ping: sendto: Invalid argument
ping: wrote 192.168.10.10 64 chars, ret=-1
ping: sendto: Invalid argument
ping: wrote 192.168.10.10 64 chars, ret=-1

cheng21884998 发表于 2007-11-30 15:32:24

help me! S0S.......
页: [1]
查看完整版本: VMWare 3.1 server + skyeye +uClinux 问题