急急！skyeye模拟at91rm9200出想的问题
# /root/skyeye-1.2.4/binary/skyeye -e vmlinuxbig_endian is false.
arch: arm
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
mach info: name at91rm92, mach_init addr 0x8067fb0
uart_mod:0, desc_in:, desc_out:, converter:
SKYEYE: use arm920t mmu ops
Loaded RAM ./initrd
start addr is set to 0xc0008000 by exec file.
Linux version 2.6.20.20 ([email protected]) (gcc version 3.4.1) #1 Sat May 10 19:16:45 CST 2008
CPU: ARM920T revision 0 (ARMvundefined/unknown), cr=00003177
Machine: Atmel AT91RM9200-DK
Warning: bad configuration page, trying to continue
Memory policy: ECC disabled, Data cache writeback
Clocks: CPU 0 MHz, master 0 MHz, main 18.432 MHz
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists.Total pages: 8128
Kernel command line: mem=32M console=ttySAC0,115200 initrd=0xc0400000,0x200000 devfs=mount,dall root=/dev/ram0 init=/linuxrc rw
AT91: 128 gpio irqs in 4 banks
PID hash table entries: 128 (order: 7, 512 bytes)
Console: colour dummy device 80x30
Division by zero in kernel.
Division by zero in kernel.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 27892KB available (2180K code, 220K data, 100K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 2048K
NetWinder Floating Point Emulator V0.97 (double precision)
io scheduler noop registered
io scheduler anticipatory registered (default)
AT91 Watchdog Timer enabled (5 seconds, nowayout)
atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL
atmel_usart.1: ttyS1 at MMIO 0xfffc4000 (irq = 7) is a ATMEL_SERIAL
RAMDISK driver initialized: 4 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
nbd: registered device at major 43
at91_ether: probe of at91_ether failed with error -1
physmap platform flash device: 00200000 at 10000000
physmap-flash physmap-flash.0: map_probe failed
at91_cf: irqs det #64, io #0
usbmon: debugfs is not available
read sr=0x4
at91_ohci at91_ohci: AT91 OHCI
at91_ohci at91_ohci: new USB bus registered, assigned bus number 1
at91_ohci at91_ohci: irq 23, io mem 0x00300000
at91_ohci at91_ohci: init err (00000000 0000)
drivers/usb/host/ohci-at91.c: can't start at91
at91_ohci at91_ohci: startup error -75
at91_ohci at91_ohci: USB bus 1 deregistered
read sr=0x0
at91_ohci: probe of at91_ohci failed with error -75
udc: at91_udc version 3 May 2006
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
at91_i2c at91_i2c: AT91 i2c bus driver.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 2048KiB into ram disk... done.
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 100K
Warning: unable to open an initial console.
到此，就停住了！
请求帮助，这是什么原因？
你的ramdisk有问题 /dev下没有console Warning: unable to open an initial console.
这个 问题 已解决，忘了mknod console c 5 1了，
但是又遇见了新问题了，错误如下：
# /root/skyeye-1.2.4/binary/skyeye -e vmlinux
big_endian is false.
arch: arm
cpu info: armv4, arm920t, 41009200, ff00fff0, 2
mach info: name at91rm92, mach_init addr 0x8067fb0
uart_mod:0, desc_in:, desc_out:, converter:
SKYEYE: use arm920t mmu ops
Loaded RAM ./initrd_1.0
start addr is set to 0xc0008000 by exec file.
Linux version 2.6.20.20 ([email protected]) (gcc version 3.4.1) #1 Sat May 10 21:39:20 CST 2008
CPU: ARM920T revision 0 (ARMvundefined/unknown), cr=00003177
Machine: Atmel AT91RM9200-DK
Warning: bad configuration page, trying to continue
Memory policy: ECC disabled, Data cache writeback
Clocks: CPU 0 MHz, master 0 MHz, main 18.432 MHz
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
CPU0: D cache: 16384 bytes, associativity 64, 32 byte lines, 8 sets
Built 1 zonelists.Total pages: 8128
Kernel command line: mem=32M console=ttyS0,115200 initrd=0xc0400000,0x200000 devfs=mount,dall root=/dev/ram0 init=/linuxrc rw
AT91: 128 gpio irqs in 4 banks
PID hash table entries: 128 (order: 7, 512 bytes)
Console: colour dummy device 80x30
Division by zero in kernel.
Division by zero in kernel.
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 32MB = 32MB total
Memory: 28108KB available (2004K code, 190K data, 92K init)
Mount-cache hash table entries: 512
CPU: Testing write buffer coherency: ok
NET: Registered protocol family 16
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 512 (order: -1, 2048 bytes)
TCP: Hash tables configured (established 1024 bind 512)
TCP reno registered
checking if image is initramfs...it isn't (bad gzip magic numbers); looks like an initrd
Freeing initrd memory: 2048K
NetWinder Floating Point Emulator V0.97 (double precision)
io scheduler noop registered
io scheduler anticipatory registered (default)
AT91 Watchdog Timer enabled (5 seconds, nowayout)
atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL
atmel_usart.1: ttyS1 at MMIO 0xfffc4000 (irq = 7) is a ATMEL_SERIAL
RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
loop: loaded (max 8 devices)
at91_ether: probe of at91_ether failed with error -1
physmap platform flash device: 00200000 at 10000000
physmap-flash physmap-flash.0: map_probe failed
at91_cf: irqs det #64, io #0
usbmon: debugfs is not available
read sr=0x4
at91_ohci at91_ohci: AT91 OHCI
at91_ohci at91_ohci: new USB bus registered, assigned bus number 1
at91_ohci at91_ohci: irq 23, io mem 0x00300000
at91_ohci at91_ohci: init err (00000000 0000)
drivers/usb/host/ohci-at91.c: can't start at91
at91_ohci at91_ohci: startup error -75
at91_ohci at91_ohci: USB bus 1 deregistered
read sr=0x0
at91_ohci: probe of at91_ohci failed with error -75
udc: at91_udc version 3 May 2006
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
at91_i2c at91_i2c: AT91 i2c bus driver.
TCP cubic registered
NET: Registered protocol family 1
NET: Registered protocol family 17
RAMDISK: ext2 filesystem found at block 0
RAMDISK: Loading 2048KiB into ram disk... done.
VFS: Mounted root (ext2 filesystem).
Freeing init memory: 92K
Division by zero in kernel.
Division by zero in kernel.
Division by zero in kernel.
Division by zero in kernel.
Division by zero in kernel.
Division by zero in kernel.
Division by zero in kernel.
到此就停住了 ，且上述是什么原因导致的Division by zero in kernel？
望高手指点！！
谢谢！！
Division by zero in kernel不影响系统使用 主要是MCKR初值没有赋，你取消skyeye没模拟外设支持，只保留串口相关的试试 怎样操作才行呢？
谢谢！因为本人是一个 新手
页:
[1]